Solved

sbs 2011 cannot access certain https websites

Posted on 2012-03-20
1
1,070 Views
Last Modified: 2013-12-02
hi,

we have sbs 2011 and sbs 2011 cannot access certain https websites.  windows firewall on server is disabled.  only thing that works is to add public dns to a client.

any one ever heard of this?  thoughts?
0
Comment
Question by:communitypc
1 Comment
 
LVL 39

Accepted Solution

by:
Adam Brown earned 500 total points
ID: 37744819
You probably need to configure DNS forwarders for your SBS Server's DNS server. http://www.pctips3000.com/how-to-configure-dns-forwarders-in-windows-server-2008/ has instructions on how to do this. Basically you just set up a Public DNS server as a forwarder and any request that the SBS server doesn't have information on is forwarded to that server. This will allow you to configure public DNS for clients that are using the SBS server as their DNS server.
0

Featured Post

Best Practices: Disaster Recovery Testing

Besides backup, any IT division should have a disaster recovery plan. You will find a few tips below relating to the development of such a plan and to what issues one should pay special attention in the course of backup planning.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Issue: One Windows 2008 R2 64bit server on the network unable to connect to a buffalo Device (Linkstation) with firmware version 1.56. There are a total of four servers on the network this being one of them. Troubleshooting Steps: Connect via h…
Restoring deleted objects in Active Directory has been a standard feature in Active Directory for many years, yet some admins may not know what is available.
This tutorial will give a short introduction and overview of Backup Exec 2012 and how to navigate and perform basic functions. Click on the Backup Exec button in the upper left corner. From here, are global settings for the application such as conne…
This tutorial will walk an individual through setting the global and backup job media overwrite and protection periods in Backup Exec 2012. Log onto the Backup Exec Central Administration Server. Examine the services. If all or most of them are stop…

820 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question