?
Solved

HP Proliant ML330 G6

Posted on 2012-03-21
6
Medium Priority
?
1,796 Views
Last Modified: 2013-12-02
Hi, I have just pruchased an HP ML330 G6 with HP P410 Raid Controller and 12 Gig Ram. I have pressed F8 and created a raid 0+1 with 2 1 Terabyte drives and also a spare 1 terabyte and also changed the befault boot to the Logical drive and the controller to the P410. It starts up fine, boots off the CD for HP SBS 2011, starts installing windows , copys files 100% gets about 25% of expanding, restarts but then fails to boot from the logical drive with error Bootmgr is missing, press ctrl + alt + del to restart. There is no usb key that it is trying to start from.
0
Comment
Question by:PeterNairn
6 Comments
 
LVL 2

Expert Comment

by:ven16
ID: 37746051
have you installed the HP smartStart?
0
 
LVL 3

Expert Comment

by:gorhon
ID: 37746057
Hi,

1. Please try c: drive partions for example 50 Gb, and d: drive 950 gb.

2. Sometimes memory problems have this problem. If you easy, try memory change, or decrease.
0
 
LVL 76

Expert Comment

by:Alan Hardisty
ID: 37746075
Boot from the SmartStart CD ROM and let that install your OS of choice automatically.

It is the easiest way to get your server configured and working properly.

In case you don't have the latest version on your CD - please download v8.70b x64 (if you are installing a 64-bit OS) from:

http://h18004.www1.hp.com/products/servers/management/core-management-100.html
0
Improve Your Query Performance Tuning

In this FREE six-day email course, you'll learn from Janis Griffin, Database Performance Evangelist. She'll teach 12 steps that you can use to optimize your queries as much as possible and see measurable results in your work. Get started today!

 
LVL 7

Expert Comment

by:PaulNSW
ID: 37746143
did you mark the RAID as bootable in its own BIOS where you configure the RAID? Did you also change the boot order in the server BIOS?

try installing Ubuntu to see if that works, if it does, maybe Windows does not like some of your hardware or is missing drivers for it
0
 

Accepted Solution

by:
PeterNairn earned 0 total points
ID: 37981544
Swapped all memory for new memory and installed fine, must have been a faulty dimm
0
 

Author Closing Comment

by:PeterNairn
ID: 37996154
Faulty hardware
0

Featured Post

Free Tool: Subnet Calculator

The subnet calculator helps you design networks by taking an IP address and network mask and returning information such as network, broadcast address, and host range.

One of a set of tools we're offering as a way of saying thank you for being a part of the community.

Question has a verified solution.

Are you are experiencing a similar issue? Get a personalized answer when you ask a related question.

Have a better answer? Share it in a comment.

Join & Write a Comment

Welcome to my series of short tips on migrations. Whilst based on Microsoft migrations the same principles can be applied to any type of migration. My first tip Migration Tip #1 – Source Server Health can be found here: http://www.experts-exchang…
Backups and Disaster RecoveryIn this post, we’ll look at strategies for backups and disaster recovery.
In this video, Percona Director of Solution Engineering Jon Tobin discusses the function and features of Percona Server for MongoDB. How Percona can help Percona can help you determine if Percona Server for MongoDB is the right solution for …
In this video, Percona Solutions Engineer Barrett Chambers discusses some of the basic syntax differences between MySQL and MongoDB. To learn more check out our webinar on MongoDB administration for MySQL DBA: https://www.percona.com/resources/we…

589 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question