Posted on 2012-03-21
Last Modified: 2012-03-25
I have a a Cisco 2921 router with Security software Version 15.0(1)M3. that I use for site to site VPN connectivity. I have a client with a Mac with OSX 10.7 i want to install Anyconnect VPN client (latest version to support 10.7 OSX) on this MAC can the 2921 support connectivity from anyconnect VPN clients and if it does how can I implement this

Question by:s1mwat
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
LVL 51

Accepted Solution

Netman66 earned 360 total points
ID: 37750686
Check the flash directory - if the anyconnect client pkgs are there for win, mac and linux then you should be able to push it out from the device.

Web into the router and you should be able to load up ASDM-IME software right off the device and that will tell you if you can setup Anyconnect.

Latest releases are here for Anyconnect - but require SmartNet access.

Author Closing Comment

ID: 37763510
Thanks for that, I've also discovered I need to purchase SSL licenses for the router.

Featured Post

Independent Software Vendors: We Want Your Opinion

We value your feedback.

Take our survey and automatically be enter to win anyone of the following:
Yeti Cooler, Amazon eGift Card, and Movie eGift Card!

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

As cyber crime continues to grow in both numbers and sophistication, a troubling trend of optimization has emerged over the last year.
Arrow Electronics was searching for a KVM  (Keyboard/Video/Mouse) switch that could display on one single monitor the current status of all units being tested on the rack.
After creating this article (, I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
Windows 10 is mostly good. However the one thing that annoys me is how many clicks you have to do to dial a VPN connection. You have to go to settings from the start menu, (2 clicks), Network and Internet (1 click), Click VPN (another click) then fi…

749 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question