Solved

Windows 2008 Printing and Windows Firewall

Posted on 2012-03-21
2
441 Views
Last Modified: 2012-03-28
The geniuses at Microsoft decided to force you to enable the Windows Firewall to share printers, I know you can turn it on and then turn it off after sharing but is there a way to completely turn off whatever forced you to turn on the firewall so you can leave the firewall disabled?
0
Comment
Question by:REIUSA
2 Comments
 
LVL 59

Accepted Solution

by:
Darius Ghassem earned 500 total points
ID: 37747748
How are you disabling the firewall? Are you stopping the service? If you are stopping service don't do that the service needs to be running but you can disable the firewall by going through these steps.

http://technet.microsoft.com/en-us/library/cc766337(v=ws.10).aspx
0
 

Author Closing Comment

by:REIUSA
ID: 37776876
Thanks.
0

Featured Post

Netscaler Common Configuration How To guides

If you use NetScaler you will want to see these guides. The NetScaler How To Guides show administrators how to get NetScaler up and configured by providing instructions for common scenarios and some not so common ones.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

The DROP (Spamhaus Don't Route Or Peer List) is a small list of IP address ranges that have been stolen or hijacked from their rightful owners. The DROP list is not a DNS based list.  It is designed to be downloaded as a file, with primary intention…
While rebooting windows server 2003 server , it's showing "active directory rebuilding indices please wait" at startup. It took a little while for this process to complete and once we logged on not all the services were started so another reboot is …
To efficiently enable the rotation of USB drives for backups, storage pools need to be created. This way no matter which USB drive is installed, the backups will successfully write without any administrative intervention. Multiple USB devices need t…
This tutorial will walk an individual through the steps necessary to join and promote the first Windows Server 2012 domain controller into an Active Directory environment running on Windows Server 2008. Determine the location of the FSMO roles by lo…

773 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question