Solved

Configure a guest wireless on a cisco 4400 series controller

Posted on 2012-03-21
3
683 Views
Last Modified: 2012-05-07
Hi guys,

I'm trying to setup a guest wireless through my cisco 4400 series WLC. The access points are model: AIR-LAP1252AG-A-K9

I need a great step by step tutorial for this.  I have an idea but want to make sure before i configure and find out it doesnt work. lol

Please help.

ALl access points are in AP Local mode.

Thanks in advance!
0
Comment
Question by:vmagan
  • 2
3 Comments
 
LVL 3

Accepted Solution

by:
Charlie2012 earned 500 total points
ID: 37749948
0
 
LVL 6

Author Comment

by:vmagan
ID: 37752200
I will take a look and keep you posted. I should be implementing this in the next few days.

Thanks
0
 
LVL 6

Author Closing Comment

by:vmagan
ID: 37939775
Thanks for the links.
0

Featured Post

VMware Disaster Recovery and Data Protection

In this expert guide, you’ll learn about the components of a Modern Data Center. You will use cases for the value-added capabilities of Veeam®, including combining backup and replication for VMware disaster recovery and using replication for data center migration.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

In this article I will describe how to setup a Cisco WLC 5508 to work with Apple's Bonjour protocol across VLANs.  I will also discuss using screen mirroring and Airplay on an AppleTV v3.  This article covers the wireless network only and requires m…
This subject  of securing wireless devices conjures up visions of your PC or mobile phone connecting to the Internet through some hotspot at Starbucks. But it is so much more than that. Let’s look at the facts: devices#sthash.eoFY7dic.
This Micro Tutorial will show you how to maximize your wireless card to its maximum capability. This will be demonstrated using Intel(R) Centrino(R) Wireless-N 2230 wireless card on Windows 8 operating system.
Viewers will learn how to connect to a wireless network using the network security key. They will also learn how to access the IP address and DNS server for connections that must be done manually. After setting up a router, find the network security…

778 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question