Solved

Cisco 3560 OID's not being sent by device

Posted on 2012-03-22
1
740 Views
Last Modified: 2012-06-22
We are trying to use a software that has a port mapper function built in. The vendor says that the OID's below are not being sent by the 3560. How can I configure the device to send these OID's? We are using SNMP v3


            "1.3.6.1.4.1.9.9.23.1.2.1.1.3",     // cdpCacheTable.cdpCacheAddressType
            "1.3.6.1.4.1.9.9.23.1.2.1.1.4",     // cdpCacheTable.cdpCacheAddress
            "1.3.6.1.4.1.9.9.23.1.2.1.1.6",     // cdpCacheTable.cdpCacheDeviceId
            "1.3.6.1.4.1.9.9.23.1.2.1.1.7",     // cdpCacheTable.cdpCacheDevicePort
            "1.3.6.1.4.1.9.9.23.1.2.1.1.9",     // cdpCacheTable.cdpCacheCapabilities
0
Comment
Question by:LIBBB
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
1 Comment
 
LVL 15

Accepted Solution

by:
Nayyar HH (CCIE RS) earned 500 total points
ID: 37764808
Configure SNMP v3 on the device and the Software once configured with the SNMP settings
should be able to poll the switch for those OID's

This link details howto configure SNMP v3
http://docwiki.cisco.com/wiki/Snmp_v3_configurations

In Summary:

SNMP commands for SNMPv3: IOS.
+ snmp-server group V3Group v3 [auth/noauth] read V3Read write V3Write
+ snmp-server user V3User V3Group v3 auth [sha/md5] [password]
+ snmp-server view V3Read iso included
+ snmp-server view V3Write iso included
+ snmp-server host <IP_address> version 3 auth V3User
+ snmp-server enable traps
0

Featured Post

Upcoming Webinar: Securing your MySQL/MariaDB data

Join Percona’s Chief Evangelist, Colin Charles as he presents Securing your MySQL®/MariaDB® data on Tuesday, July 11, 2017 at 7:00 am PDT / 10:00 am EDT (UTC-7).

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

If you're not part of the solution, you're part of the problem.   Tips on how to secure IoT devices, even the dumbest ones, so they can't be used as part of a DDoS botnet.  Use PRTG Network Monitor as one of the building blocks, to detect unusual…
When you try to share a printer , you may receive one of the following error messages. Error message when you use the Add Printer Wizard to share a printer: Windows could not share your printer. Operation could not be completed (Error 0x000006…
If you're a developer or IT admin, you’re probably tasked with managing multiple websites, servers, applications, and levels of security on a daily basis. While this can be extremely time consuming, it can also be frustrating when systems aren't wor…
Michael from AdRem Software explains how to view the most utilized and worst performing nodes in your network, by accessing the Top Charts view in NetCrunch network monitor (https://www.adremsoft.com/). Top Charts is a view in which you can set seve…

726 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question