Cisco Aironet 1024n Configuration

Posted on 2012-03-22
Last Modified: 2013-02-20
Hi all,

We are using a Cisco Aironet 1024n device. What we want to do is use the local Radius server on the access point. If we try and connect through EAP we have a problem. I can fill in the username and password but no connection is made after that

When we use the open+shared key connection we get a normal connection.

I'm sure I'm missing something here but I can't figure out what, anyone with any idea's we might try?

Many thanks in advance.


Question by:kvannus
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
  • 3
  • 2
LVL 12

Expert Comment

by:Henk van Achterberg
ID: 37760439
Is EPA supported with the integrated radius server? The last time I checked this was not the case.
LVL 46

Accepted Solution

Craig Beck earned 500 total points
ID: 37761018

Author Comment

ID: 37780641
@craigbeck - thanks for the link. I will follow the instructions and let you know if I got things working.

Simple, centralized multimedia control

Watch and learn to see how ATEN provided an easy and effective way for three jointly-owned pubs to control the 60 televisions located across their three venues utilizing the ATEN Control System, Modular Matrix Switch and HDBaseT extenders.


Author Comment

ID: 37815626
I followed the instructions but I still can't get it working.

The problem is, when i want to connect to the SSID it gives me a username and password to enter.  When I enter the username and password from the created user (user XXX password XXX group XXX) I still can not connect.

I then run the command: sh radius local-server statistics, and I only get the error from the local radius server: Invalid packet from NAS.

Am I right that the authentication from the NAS to the local radius server is ok?

Any idea what I'm doing wrong?

LVL 46

Expert Comment

by:Craig Beck
ID: 37817540
Have you issued the radius-server local command?

Author Comment

ID: 37827032
"Have you issued the radius-server local command?"



Featured Post

PeopleSoft Has Never Been Easier

PeopleSoft Adoption Made Smooth & Simple!

On-The-Job Training Is made Intuitive & Easy With WalkMe's On-Screen Guidance Tool.  Claim Your Free WalkMe Account Now

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

Most MSPs worth their salt are already offering cybersecurity to their customers. But cybersecurity as a service is wide encompassing and can mean many things.  So where are MSPs falling in this spectrum?
Ransomware is a malware that is again in the list of security  concerns. Not only for companies, but also for Government security and  even at personal use. IT departments should be aware and have the right  knowledge to how to fight it.
Viewers will learn how to connect to a wireless network using the network security key. They will also learn how to access the IP address and DNS server for connections that must be done manually. After setting up a router, find the network security…
With Secure Portal Encryption, the recipient is sent a link to their email address directing them to the email laundry delivery page. From there, the recipient will be required to enter a user name and password to enter the page. Once the recipient …

739 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question