Go Premium for a chance to win a PS4. Enter to Win

x
?
Solved

Ethernet connection to Ricoh copier

Posted on 2012-03-23
7
Medium Priority
?
113 Views
Last Modified: 2015-05-01
I have a small peer to peer 10/100 network. I have just changed my broadband provider and although I can see and connect to other pc's on the network, the copier/printer which is also on the network cannot be found or added to the network for use by all users

Help please
0
Comment
Question by:Jerrydp27
  • 4
7 Comments
 
LVL 11

Expert Comment

by:itguy565
ID: 37757905
Jerry,

Likely when your network was changed over your DHCP scope changed and thus forced your subnet to change along with it. I would suggest printing out a network configuration page from the RICOH printer and determining what IP address it is using. After this has been established determine an available IP address on your new network and then reassign a static IP to that printer that corresponds with the new subnet.
0
 
LVL 11

Expert Comment

by:itguy565
ID: 37757912
What is the exact model of the RICOH copier?
0
 

Author Comment

by:Jerrydp27
ID: 37757952
It is a Ricoh 3224 c. Aficio
0
 
LVL 11

Accepted Solution

by:
itguy565 earned 2000 total points
ID: 37757978
Here is a direct excerpt from a ricoh printer guide on how to do this:
network config 1network config pg 2
0
 
LVL 11

Assisted Solution

by:itguy565
itguy565 earned 2000 total points
ID: 37757988
This PDF should give you all the information you need to network this printer or change the IP Address:

http://support.ricoh.com/bb_v1oi/pub_e/oi/0001027/0001027365/VB1807515A/B1807515A.pdf
0

Featured Post

Veeam Disaster Recovery in Microsoft Azure

Veeam PN for Microsoft Azure is a FREE solution designed to simplify and automate the setup of a DR site in Microsoft Azure using lightweight software-defined networking. It reduces the complexity of VPN deployments and is designed for businesses of ALL sizes.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

In this tutorial I will show you with short command examples how to obtain a packet footprint of all traffic flowing thru your Juniper device running ScreenOS. I do not know the exact firmware requirement, but I think the fprofile command is availab…
 One of the main issues with network wires is that you never have enough.  You run plenty and plan for the worst case but you still end up needing more.  What many people do not realize is with 10BaseT and 100BaseT (but not 1000BaseT) networks you …
Please read the paragraph below before following the instructions in the video — there are important caveats in the paragraph that I did not mention in the video. If your PaperPort 12 or PaperPort 14 is failing to start, or crashing, or hanging, …
This lesson discusses how to use a Mainform + Subforms in Microsoft Access to find and enter data for payments on orders. The sample data comes from a custom shop that builds and sells movable storage structures that are delivered to your property. …
Suggested Courses

972 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question