Solved

PPTP suddenly allows multiple users from same nat to dialin to same host???

Posted on 2012-03-24
1
314 Views
Last Modified: 2012-06-27
So lets say I'm sitting at home and I PPTP dial-into my corporate office from a PC on my home network. Connect to some resources, and do my thing. Then later lets say I am at a different PC at home and dial-in via PPTP to my office from it, while I'm also dialed in from the other PC at home. In the past, that would not have worked - it's always been an issue with have 2 hosts behind the same NAT connected to the same external host - it would knock one or the other off the network.

Suddenly it's working though and I'm not sure why... I recently upgrade my home router to a DLINK DIR-655 which I wouldn't think would make a big difference, but is this just something that's been around now for a while and I hadn't noticed or is this weird to anyone else??
0
Comment
Question by:intelliwyse
1 Comment
 
LVL 77

Accepted Solution

by:
arnold earned 250 total points
ID: 37762099
You might nt be enforcing the one session on the pptp server.
Wile the wan ip for both connections remins the same the source port is what differentiates the two connections. The server configuration is the limiter/enforcer of the single session.
0

Featured Post

Windows Server 2016: All you need to know

Learn about Hyper-V features that increase functionality and usability of Microsoft Windows Server 2016. Also, throughout this eBook, you’ll find some basic PowerShell examples that will help you leverage the scripts in your environments!

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

Title # Comments Views Activity
SRX240 SYSLOG Setting 6 119
SIEM traffic 5 59
100mbps vs. 100mbps on cat6e - Cable is 50m 6 77
Cisco 3560 switches not seeing VTP V3 12 67
The article explains the protocols and technology which is involved when two computers on different TCP/IP networks communicate with each other. In the diagram, a router is used to segregate two networks. The networks are 192.168.1.0/24 and 192…
This is the first one of a series of articles I’ll be writing to address technical issues that are always referred to as network problems. The network boundaries have changed, therefore having an understanding of how each piece in the network  puzzl…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

860 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question