Solved

remote execute cmds to Cisco Wireless Controller

Posted on 2012-03-25
2
348 Views
Last Modified: 2012-09-19
Hi experts,
   I plan to automate some tasks on WLC, but i'm stuck /w wlc authentication. When i call ssh to wlc, 3 actions are required before cmd prompt apprears
   - input user account
   - input user account (again)
   - input password
   So i can built script or dll for automation cause unable to establish ssh connection (use C# library)
   Thank you.

p/s: i'm successful /w Cisco catalyst :)
0
Comment
Question by:vng_itmis
2 Comments
 
LVL 6

Accepted Solution

by:
Ramakrishna Prabhu earned 500 total points
ID: 37764341
0
 

Author Comment

by:vng_itmis
ID: 37764754
Thank you, Chesperito. But issue is wlc requesting to input username twice, it's unusual as SSH connection, so initiation will be fail.
0

Featured Post

Manage your data center from practically anywhere

The KN8164V features HD resolution of 1920 x 1200, FIPS 140-2 with level 1 security standards and virtual media transmissions at twice the speed. Built for reliability, the KN series provides local console and remote over IP access, ensuring 24/7 availability to all servers.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

This subject  of securing wireless devices conjures up visions of your PC or mobile phone connecting to the Internet through some hotspot at Starbucks. But it is so much more than that. Let’s look at the facts: devices#sthash.eoFY7dic.
This paper addresses the security of Sennheiser DECT Contact Center and Office (CC&O) headsets. It describes the DECT security chain comprised of “Pairing”, “Per Call Authentication” and “Encryption”, which are all part of the standard DECT protocol.
This Micro Tutorial will show you how to maximize your wireless card to its maximum capability. This will be demonstrated using Intel(R) Centrino(R) Wireless-N 2230 wireless card on Windows 8 operating system.
Viewers will learn how to connect to a wireless network using the network security key. They will also learn how to access the IP address and DNS server for connections that must be done manually. After setting up a router, find the network security…

680 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question