Solved

Cisco DHCP database empty

Posted on 2012-03-26
2
543 Views
Last Modified: 2012-03-26
We have a Cisco Router which dishes out DHCP addresses, and I would like to retrieve the entries.

I tried the command show ip dhcp database but there were no entries. I think the command may not be the right one for what I'm after.

I confirmed that there is a DHCP pool that has 23 addresses assigned on this router. Is there a pool name that needs to be specified in order to yield results?
0
Comment
Question by:GlennCameron
2 Comments
 
LVL 24

Accepted Solution

by:
smckeown777 earned 100 total points
ID: 37768840
This command will show what you need

sh ip dhcp binding
0
 

Author Closing Comment

by:GlennCameron
ID: 37768890
that worked, thanks.
0

Featured Post

Microsoft Certification Exam 74-409

Veeam® is happy to provide the Microsoft community with a study guide prepared by MVP and MCT, Orin Thomas. This guide will take you through each of the exam objectives, helping you to prepare for and pass the examination.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

We've been using the Cisco/Linksys RV042 for years as: - an internet Gateway - a site-to-site VPN device - a leased line site-to-site subnet-to-subnet interface (And, here I'm assuming that any RV0xx behaves the same way as an RV042.  So that's …
Getting hacked is no longer a matter or "if you get hacked" — the 2016 cyber threat landscape is now titled "when you get hacked." When it happens — will you be proactive, or reactive?
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

820 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question