?
Solved

cisco 3750

Posted on 2012-03-27
3
Medium Priority
?
446 Views
Last Modified: 2012-03-30
Hi,

We are using the Cisco 3750 switch in our enviormet.
what is the command or way to check the switch interface when it was used last time it for the notconnect interfaces.

Thanks
0
Comment
Question by:network-guru
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
  • 2
3 Comments
 
LVL 10

Expert Comment

by:Netty
ID: 37772442
(Sorry for my English)
If I correctly understand you, you can use a "#show interface" command. In the output of this command look at similar string "Last input 00:00:03, output 00:01:08".
0
 

Author Comment

by:network-guru
ID: 37773711
correct but most of the time it says never. what does it means ?

Thanks.
0
 
LVL 10

Accepted Solution

by:
Netty earned 1500 total points
ID: 37773964
(SOrry for my English)
"Last input Never" means there was no successful interface packet transfer to other end point, of course.

Please, show us an full output of #sh int {specify the port that you are interested in}.
0

Featured Post

Get MongoDB database support online, now!

At Percona’s web store you can order your MongoDB database support needs in minutes. No hassles, no fuss, just pick and click. Pay online with a credit card. Handle your MongoDB database support now!

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

There are times where you would like to have access to information that is only available from a different network. This network could be down the hall, or across country. If each of the network sites have access to the internet, you can create a ne…
In the world of WAN, QoS is a pretty important topic for most, if not all, networks. Some WAN technologies have QoS mechanisms built in, but others, such as some L2 WAN's, don't have QoS control in the provider cloud.
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
Monitoring a network: how to monitor network services and why? Michael Kulchisky, MCSE, MCSA, MCP, VTSP, VSP, CCSP outlines the philosophy behind service monitoring and why a handshake validation is critical in network monitoring. Software utilized …
Suggested Courses
Course of the Month11 days, 3 hours left to enroll

770 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question