Solved

switch port span

Posted on 2012-03-27
4
514 Views
Last Modified: 2012-06-22
Hi,

I have the printer connected on the cisco 3750 switch port. Is it possible to span that printer port to any LAPTOP or PC from the same switch.

That print talks to the Cisco ACS. I need to capture the communication with that printer.
To do that what configuration change i needs to be done.

Thanks.
0
Comment
Question by:network-guru
  • 2
4 Comments
 
LVL 29

Expert Comment

by:pwindell
ID: 37772706
Configure the port the Printer is to to be the Monitored Port
Configure the Port the Laptop is on to be the Monitoring Port.
0
 

Author Comment

by:network-guru
ID: 37773676
Please if you could provide me the exact configuration or command which i need to put on the printer port and the LAPTOP port.

Printer is connected on Gi0/1
Laptop is connected on Gi0/2

Please suggest.
0
 
LVL 29

Expert Comment

by:pwindell
ID: 37773707
I can't.  You have to look that up in the Docs of the particular Brand and Model of switch you are using.   I can only point you in the right direction, but you'll have to work out the exact details for what you are running.   If you now know what you are looking for it should not be that difficult to figure out.
0
 
LVL 11

Accepted Solution

by:
Khandakar Ashfaqur Rahman earned 500 total points
ID: 37777475
0

Featured Post

PRTG Network Monitor: Intuitive Network Monitoring

Network Monitoring is essential to ensure that computer systems and network devices are running. Use PRTG to monitor LANs, servers, websites, applications and devices, bandwidth, virtual environments, remote systems, IoT, and many more. PRTG is easy to set up & use.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

Introduction This article explores the design of a cache system that can improve the performance of a web site or web application.  The assumption is that the web site has many more “read” operations than “write” operations (this is commonly the ca…
Creating an OSPF network that automatically (dynamically) reroutes network traffic over other connections to prevent network downtime.
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

816 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

13 Experts available now in Live!

Get 1:1 Help Now