Solved

Intermittent Hyper-V Guest Networking issue

Posted on 2012-03-27
5
910 Views
Last Modified: 2016-11-24
Hey

I'm having issue tracking down a hyper v issue/RDS issue. I have

Hyper V 2008 R2 Server running from Dell T-610. Single NIC is wired to gigabit switch, both VM access this through an external network i created.

VM 1 SBS 2011
SM 2 2008 R2 RDS

RDS is setup and working, licenced. The issue is intermittently when I try and open a RDP connection from the SBS 2011 VM the connection fails, if I immeditaly try to telnet to RDS 3389 that also fails. After a few minutes i try again and both the RDS is accepted and the telnet test also connect. Not sure where to start with this. Is this an RDS issue or flakey networking from the Hyper-V server

Thanks
0
Comment
Question by:Amiga-2000
  • 3
  • 2
5 Comments
 
LVL 3

Accepted Solution

by:
HyperAdvisor earned 500 total points
ID: 37775958
I've had that too, I have 16 NICs in my hosts configured in teams of 4. I have 2008R2 with SP1, install the lastest patches from Microsoft and try it again
It sorted my problem
0
 

Author Comment

by:Amiga-2000
ID: 37779142
i did see some updates so will try that. Thanks
0
 
LVL 3

Expert Comment

by:HyperAdvisor
ID: 37780714
Any luck with the updates ?
0
 

Author Comment

by:Amiga-2000
ID: 37785549
Seems to of fixed it thanks. Had two RDP sessions running all day. Can sleep again :)
Thx
0
 
LVL 3

Expert Comment

by:HyperAdvisor
ID: 37785897
That's good
0

Featured Post

PRTG Network Monitor: Intuitive Network Monitoring

Network Monitoring is essential to ensure that computer systems and network devices are running. Use PRTG to monitor LANs, servers, websites, applications and devices, bandwidth, virtual environments, remote systems, IoT, and many more. PRTG is easy to set up & use.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

This is an issue that we can get adding / removing permissions in the vCSA 6.0. We can also have issues searching for users / groups in the AD (using your identify sources). This is how one of the ways to handle this issues and fix it.
Restoring deleted objects in Active Directory has been a standard feature in Active Directory for many years, yet some admins may not know what is available.
This tutorial will give a an overview on how to deploy remote agents in Backup Exec 2012 to new servers. Click on the Backup Exec button in the upper left corner. From here, are global settings for the application such as connecting to a remote Back…
This tutorial will show how to configure a new Backup Exec 2012 server and move an existing database to that server with the use of the BEUtility. Install Backup Exec 2012 on the new server and apply all of the latest hotfixes and service packs. The…

809 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question