Solved

Sonicwall Firewall Remove Configured IP and Network interface from Zone

Posted on 2012-03-28
2
753 Views
Last Modified: 2012-09-24
How to Remove Configured static IP and Network interface from Zone Sonicwall NSA
( WAN Zone)
0
Comment
Question by:mash1978
2 Comments
 

Author Comment

by:mash1978
ID: 37778089
1] Existing three number of ISP configured on three different sonicwall NSA network interface and added in WAN Zone.

2] want to remove one of ISP NEtwork interface cable ,remove interface from WAN Zone and also  IP from Interface.

3] Provide steps if possible if from Sonicwall GUI or Commands line parameters to remove IP from interface.
0
 
LVL 3

Accepted Solution

by:
Konsultant earned 100 total points
ID: 37778178
This is simple. Go to:
1. Network
2. Interfaces
3. Select interface that you want to remove from the zone
4. It is most likely set to static IP. From the drop down box select Unassigned instead of WAN

This should be enough. th interface will be removed from the Zone WAN and LB group.

Sonicwall should stop advertising this IP. Keep in mind that the external router may still have an ARP entry for this IP so you may need to wait or reboot it. (Cisco may keep the entry for 18min!)

Good luck!
0

Featured Post

Free camera licenses with purchase of My Cloud NAS

Milestone Arcus software is compatible with thousands of industry-leading cameras for added flexibility. Upon installation on your My Cloud NAS, you will receive two (2) camera licenses already enabled in the software. And for a limited time, get additional camera licenses FREE.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

Do you have a computer or other electronic gear that is attached to a rat nest of cables, or alternatively have your cables all bundled nice at neat?  If so then read this post to sidstep common pitfalls. When I was a student at DeVry University,…
Network traffic routing plays key role in your network, if you have single site with heavy browsing or multiple sites, replicating important application data from your Primary Default Gateway ,you have to route your other network traffic from your p…
A short film showing how OnPage and Connectwise integration works.
This is a video that shows how the OnPage alerts system integrates into ConnectWise, how a trigger is set, how a page is sent via the trigger, and how the SENT, DELIVERED, READ & REPLIED receipts get entered into the internal tab of the ConnectWise …

943 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

1 Experts available now in Live!

Get 1:1 Help Now