Solved

Access point with multiple SSID

Posted on 2012-03-31
3
1,568 Views
Last Modified: 2012-03-31
Hi All,

My company has a Netgear WFS709TP and fourteen WAG102 access points for our LAN.

I've been asked to setup a visitor Wifi network.  Rather than spend £3,000 on additional hardware I wondered if the current access points are able to broadcast two SSID's.  Ideally on a seperate vLAN

I found the Access Points manual online;
http://documentation.netgear.com/wag102/enu/202-10120-01/v1/pdfs/FullManual.pdf

Thanks
0
Comment
Question by:detox1978
  • 2
3 Comments
 
LVL 17

Expert Comment

by:Anuroopsundd
ID: 37790579
It supports Multiple SSIDs and uses WEP and WPA/WPA2 wireless encryption.
http://www.speedguide.net/routers/netgear-wag102-prosafe-dual-band-wireless-access-784
0
 
LVL 17

Accepted Solution

by:
Anuroopsundd earned 500 total points
ID: 37790587
ftp://downloads.netgear.com/files/wag102_FullManual.pdf
please go through this document ..
page 18
0
 
LVL 2

Author Comment

by:detox1978
ID: 37790589
is this something that is setup on the AP or the WFS709TP?
0

Featured Post

PRTG Network Monitor: Intuitive Network Monitoring

Network Monitoring is essential to ensure that computer systems and network devices are running. Use PRTG to monitor LANs, servers, websites, applications and devices, bandwidth, virtual environments, remote systems, IoT, and many more. PRTG is easy to set up & use.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Need WiFi? Often, there are perfectly good networks that don't have WiFi capability - and there's a need to add it.  - Perhaps you have an Ethernet port into a network but no WiFi nearby. - Perhaps you have a powerline extender and no WiFi at the…
How to set-up an On Demand, IPSec, Site to SIte, VPN from a Draytek Vigor Router to a Cyberoam UTM Appliance. A concise guide to the settings required on both devices
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

919 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

12 Experts available now in Live!

Get 1:1 Help Now