Solved

Setting up a Lion Server in Windows 2008 network

Posted on 2012-04-01
3
688 Views
Last Modified: 2012-04-03
Hi.

At my work we have a windows 2008 server network for our windows machines. The IT department at our comunity is in charge of the windows server. Our department has bought iPads for the workers and they have bought a Lion server to administrate the iPads and the Macs on our network.

The scenario is like this:

The windows server is set up to administrate the windows machines on a local network with ip range: 10.16.142.x and 10.16.172.x with default gateway 10.16.x.x and a proxy server on 10.0.x.x.

The windows server has a network card for each network range (Two network cards)

Now, I got the job of setting ut a Lion Server on the 10.16.142.x range to administrate the macs and the iPads. We have been testing Filewave to administrate the iPads and everything works as i should in a testnetwork physically on it own network.

The lion server is set ut with DNS and Open Directory, but no DHCP.
When I ping the server, when connected in the 10.16.142.x network I get answers but Filewave is not working and I can not get in contact with the macs on the Lion server.

I am not so sure this is good practise in networking, but how can I set up two nameservers in the network, one for windows and one Lion server for macs and both beeing able to connect to the internett, through the proxy server and making Filemaker work?

Thanks in advanse for any help...
0
Comment
Question by:chlaas
  • 2
3 Comments
 
LVL 32

Expert Comment

by:nappy_d
ID: 37795414
You cannot and should not have two separate and DNS servers on your network.

You should integrate your Mac Server into your AD infrastructure.
0
 

Author Comment

by:chlaas
ID: 37798263
OK.

How to I integrate the Lion server into the AD infrastructure? Do I connect the Open Directory to the AD and get the user information via LDAP? Sorry for being green, but I got this problem last week without asking for it.
0
 
LVL 32

Accepted Solution

by:
nappy_d earned 500 total points
ID: 37800502
Yes, that would be my recommendation to you.  Once OD is up and your Mac is bound to AD, you should have read access to AD objects and you can drag/drop the items into OD.
0

Featured Post

Better Security Awareness With Threat Intelligence

See how one of the leading financial services organizations uses Recorded Future as part of a holistic threat intelligence program to promote security awareness and proactively and efficiently identify threats.

Join & Write a Comment

Suggested Solutions

Welcome to my series of short tips on migrations. Whilst based on Microsoft migrations the same principles can be applied to any type of migration. My first tip is around source server preparation. No migration is an easy migration, there is a…
Syslogd is a utility that traps and logs messages sent by running processes. It is configured with the syslog.conf file, which consists of lines containing a pair of fields: "the selector field which specifies the types of messages and priorities to…
Get a first impression of how PRTG looks and learn how it works.   This video is a short introduction to PRTG, as an initial overview or as a quick start for new PRTG users.
This video gives you a great overview about bandwidth monitoring with SNMP and WMI with our network monitoring solution PRTG Network Monitor (https://www.paessler.com/prtg). If you're looking for how to monitor bandwidth using netflow or packet s…

743 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

12 Experts available now in Live!

Get 1:1 Help Now