Solved

Server Publishing Rule in TMG 2010

Posted on 2012-04-02
2
1,563 Views
1 Endorsement
Last Modified: 2012-08-13
Dear All,

I ma New for TMG 2010, Install TMG 2010 Std Edition (Edge Firewall), now i am trying to configure the Server Publishing Rule to access the Remote serves from anywhere its giving me the below Error:

Description: The server publishing rule Exchange Server Access, which maps Local IP:8989:TCP to Public IP:3389 for the protocol RDP (Terminal Services) Server, was unable to bind a socket for the server. The server publishing rule cannot be applied.
The failure is due to error: The requested address is not valid in its context.

Could you please check this and guide me how to solve this issue.

Thanks
Kumar
1
Comment
Question by:Ram Kumar Chellam
  • 2
2 Comments
 
LVL 51

Accepted Solution

by:
Keith Alabaster earned 500 total points
ID: 37795347
Normally means that you already have a rule or service on the TMG box that is using the required port number.
0
 
LVL 51

Expert Comment

by:Keith Alabaster
ID: 37801377
Thanks :)
0

Featured Post

Portable, direct connect server access

The ATEN CV211 connects a laptop directly to any server allowing you instant access to perform data maintenance and local operations, for quick troubleshooting, updating, service and repair.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

If you're not part of the solution, you're part of the problem.   Tips on how to secure IoT devices, even the dumbest ones, so they can't be used as part of a DDoS botnet.  Use PRTG Network Monitor as one of the building blocks, to detect unusual…
PRTG Network Monitor lets you monitor your bandwidth usage, so you know who is using up your bandwidth, and what they're using it for.
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

830 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question