Solved

LAN-Cell 2 to Cisco 5510

Posted on 2012-04-02
2
582 Views
Last Modified: 2012-04-17
Hello !

I have a question related to VPN between LAN-Cell 2 (Verizon) and Cisco ASA 5510

I would like to install this device in a location/area where DSL service is not available or very expense.  Here is the scenario

At the remote site I have a unit which pushes data back to the office (ASA side) every 5 minutes so the connection to ASA should be stable.  Another requirement is for the host in the office to connect and manage the remote device.

So I am not sure if a VPN tunnel is possible to build between these two devices via cellular network, is seems to me that most likely a Cisco 800 ISR router should be involved. But can this LAN-Cell unit be put in bridge mode ? Lots of questions..  

I wonder if someone who had done this before can share his/her experience??

Thank you for reading

Cheers
0
Comment
Question by:Bibecu
2 Comments
 
LVL 22

Accepted Solution

by:
Jody Lemoine earned 500 total points
ID: 37800417
I can't speak for the LAN-Cell device, but we've bee deploying Cisco 880 series router using Verizon 3G sticks and CradlePoint CBA750 units. Works like a charm. If the LAN-Cell is a comparable device, you should have no trouble.
0
 

Author Closing Comment

by:Bibecu
ID: 37855891
It worked !  Thanks
0

Featured Post

PRTG Network Monitor: Intuitive Network Monitoring

Network Monitoring is essential to ensure that computer systems and network devices are running. Use PRTG to monitor LANs, servers, websites, applications and devices, bandwidth, virtual environments, remote systems, IoT, and many more. PRTG is easy to set up & use.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

Tired of waiting for your show or movie to load?  Are buffering issues a constant problem with your internet connection?  Check this article out to see if these simple adjustments are the solution for you.
Quality of Service (QoS) options are nearly endless when it comes to networks today. This article is merely one example of how it can be handled in a hub-n-spoke design using a 3-tier configuration.
Viewers will learn how to connect to a wireless network using the network security key. They will also learn how to access the IP address and DNS server for connections that must be done manually. After setting up a router, find the network security…
As a trusted technology advisor to your customers you are likely getting the daily question of, ‘should I put this in the cloud?’ As customer demands for cloud services increases, companies will see a shift from traditional buying patterns to new…

791 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question