Solved

Create different DHCP range

Posted on 2012-04-02
11
403 Views
Last Modified: 2012-04-02
Hi I am trying to create DHCP scope for example
start Ip 192.168.200.65
End Ip 192.168.200.126

But while creating this range i get conflict Message as i have same IP Addrees assigned but not this range like
Start Ip 192.168.200.1
End Ip 192.168.200.62

So can some one help me to create this one.
0
Comment
Question by:jitendra_raychura
  • 6
  • 5
11 Comments
 
LVL 17

Expert Comment

by:Anuroopsundd
ID: 37798847
you can create the complete subnet for DHCP and exclude the existing ip's being used.
Start Ip 192.168.200.1
End Ip 192.168.200.255

exclude from DHCP scope ip from
Start Ip 192.168.200.1
End Ip 192.168.200.64
0
 

Author Comment

by:jitendra_raychura
ID: 37798858
But this both are different Site
And when i try to Add Exclusion
such as
192.168.200.64
192.168.200.126
but when i try to do that
i got error Ip Address range is not a subset of the overall range
0
 
LVL 17

Expert Comment

by:Anuroopsundd
ID: 37798872
what is the subnet mask you are having. i thought you are having Subnet mask of 255.255.255.0
0
What is SQL Server and how does it work?

The purpose of this paper is to provide you background on SQL Server. It’s your self-study guide for learning fundamentals. It includes both the history of SQL and its technical basics. Concepts and definitions will form the solid foundation of your future DBA expertise.

 

Author Comment

by:jitendra_raychura
ID: 37798875
yes you are right it's 255.255.255.0
0
 
LVL 17

Expert Comment

by:Anuroopsundd
ID: 37798890
So just to confirm.
you have DHCP scope from 192.168.200.1 to 192.168.200.254

then to exclude use below steps
1.Click Address Pool. Right-click Address Pool, and then click New Exclusion Range. The Add Exclusion dialog box opens.

2.In Add Exclusion, in Start IP Address, type the IP address that is the first IP address in the exclusion range.

3.In Add Exclusion, in End IP Address, type the IP address that is the last IP address in the exclusion range, and then click Add.
0
 
LVL 17

Accepted Solution

by:
Anuroopsundd earned 500 total points
ID: 37798893
here is a nice screenshot for configuration of DHCP with exclusion.. can you check and see if it helps
http://www.trainsignal.com/blog/configure-dhcp-on-windows-server-2008
0
 

Author Comment

by:jitendra_raychura
ID: 37798898
no i have 3 DHCP server
1 is having range from 192.168.200.16 - 192.168.200.32
2 DHCP server has 192.168.200.33 - 192.168.200.63
3 DR DHCP has 192.168.200.16 - 192.168.200.63
0
 
LVL 17

Expert Comment

by:Anuroopsundd
ID: 37798918
so in 2nd DHCP you can change ip range scope to
192.168.200.33 - 192.168.200.126
0
 

Author Comment

by:jitendra_raychura
ID: 37798944
no i can't as it's different site
so it has different router ip address
0
 
LVL 17

Expert Comment

by:Anuroopsundd
ID: 37798968
but you have same subnet. how will it make the difference. you may need to do subnetting on your network.

what is the ip address and subnet mask for the routers?
0
 

Author Comment

by:jitendra_raychura
ID: 37799031
Thanks Anuroop,
Problem resolved Details passed on from network team was incorrect and has different subnet which resolve this issue.
thanks for you help
0

Featured Post

Netscaler Common Configuration How To guides

If you use NetScaler you will want to see these guides. The NetScaler How To Guides show administrators how to get NetScaler up and configured by providing instructions for common scenarios and some not so common ones.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Scenario:  You do full backups to a internal hard drive in either product (SBS or Server 2008).  All goes well for a very long time.  One day, backups begin to fail with a message that the disk is full.  Your disk contains many, many more backups th…
While rebooting windows server 2003 server , it's showing "active directory rebuilding indices please wait" at startup. It took a little while for this process to complete and once we logged on not all the services were started so another reboot is …
This tutorial will show how to configure a single USB drive with a separate folder for each day of the week. This will allow each of the backups to be kept separate preventing the previous day’s backup from being overwritten. The USB drive must be s…
This Micro Tutorial hows how you can integrate  Mac OSX to a Windows Active Directory Domain. Apple has made it easy to allow users to bind their macs to a windows domain with relative ease. The following video show how to bind OSX Mavericks to …

808 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question