Solved

DHCP options for PXE Boot?

Posted on 2012-04-03
1
1,570 Views
Last Modified: 2012-06-21
I have a dhcp and tftp server on one subnet connected to Cisco router, a PXE boot client on another subnet connected to the same router. DHCP reply is setup and working properly. To make pxe boot client know what is the route (like point the router interface as default gateway) to tftp server, which DHCP option shall I use?

Thanks!
0
Comment
Question by:Rick1i
1 Comment
 
LVL 18

Accepted Solution

by:
Sanga Collins earned 500 total points
ID: 37804311
option 66, type = ip address, value = ip of tftp server
option 67, type = string, value = pxelinux.0

In similar setups where my client is in a different subnet from the tftp server, I use the DHCP server on the client subnet to set the above options. As long as the client can route to the ip of the tftp server it has worked for me. I use juniper netscreen and ssg devices, but the concepts should apply for cisco routers
0

Featured Post

PRTG Network Monitor: Intuitive Network Monitoring

Network Monitoring is essential to ensure that computer systems and network devices are running. Use PRTG to monitor LANs, servers, websites, applications and devices, bandwidth, virtual environments, remote systems, IoT, and many more. PRTG is easy to set up & use.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

In the hope of saving someone else's sanity... About a year ago we bought a Cisco 1921 router with two ADSL/VDSL EHWIC cards to load balance local network traffic over the two broadband lines we have, but we couldn't get the routing to work consi…
I recently attended Cisco Live! in Las Vegas, a conference that boasted over 28,000 techies in attendance, and a week of hands-on learning hosted by a solid partner with which Concerto goes to market.  Every year, Cisco displays cutting-edge technol…
Viewers will learn how to connect to a wireless network using the network security key. They will also learn how to access the IP address and DNS server for connections that must be done manually. After setting up a router, find the network security…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

825 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question