Solved

VPN Issue

Posted on 2012-04-03
4
290 Views
Last Modified: 2012-05-13
Having trouble connecting to a VPN.

Using SBS2003


I am getting authenticated & kicked straight off with the following message:

Registering your computer on the network......
Error 720: A connection to the remote computer could not be
established. You might need to change the network settings for this connection..


All was ok. Only change has been a change in the ISP
I have changed IP address to connect too.
Not sure?
VPN-Error.jpg
0
Comment
Question by:eclipsegems
  • 2
4 Comments
 

Expert Comment

by:SBelmont2012
Comment Utility
Is the IP set up on the router via DMZ? if so you need to update as well with new hardware from new ISP
0
 
LVL 7

Expert Comment

by:Abbas Haidar
Comment Utility
re-run the internet configuration wizard then re-run the remote access or VPN setup and it should work afterwards.
0
 

Accepted Solution

by:
eclipsegems earned 0 total points
Comment Utility
It was because another user was logged in via VPN
0
 

Author Closing Comment

by:eclipsegems
Comment Utility
Sorry but I solved it. No body had the answer
0

Featured Post

Why You Should Analyze Threat Actor TTPs

After years of analyzing threat actor behavior, it’s become clear that at any given time there are specific tactics, techniques, and procedures (TTPs) that are particularly prevalent. By analyzing and understanding these TTPs, you can dramatically enhance your security program.

Join & Write a Comment

Tired of waiting for your show or movie to load?  Are buffering issues a constant problem with your internet connection?  Check this article out to see if these simple adjustments are the solution for you.
Getting hacked is no longer a matter or "if you get hacked" — the 2016 cyber threat landscape is now titled "when you get hacked." When it happens — will you be proactive, or reactive?
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

772 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

15 Experts available now in Live!

Get 1:1 Help Now