Solved

How to set up a Cisco 2100 WLAN system

Posted on 2012-04-04
4
428 Views
Last Modified: 2012-04-12
Hello,

I have a new Cisco 2100 Wireless LAN Controller and I'm trying to get it connected to my Windows 2003 Server running a new instance of Internet Authentication Service.

Please note: I have never done this kind of set up before and am willing to blow anything away if needed.

Currently I have attached my running config but for some reason I'm not able to ping anything from the Cisco 2100 or from a client on the network but the two are connected to the same network. Could someone please look at the config and let me know what I need to do?

I'm looking to manage the new solution all in Active Director and allow users to connect to one wireless network and guests to another for internet access only.

Thanks
DB
config.txt
0
Comment
Question by:Amirsys
  • 2
  • 2
4 Comments
 
LVL 45

Accepted Solution

by:
Craig Beck earned 500 total points
ID: 37813849
0
 

Author Comment

by:Amirsys
ID: 37817375
Thanks for the help. I believe that got the server side set up. But when I try and access the wlan I'm not able to ping it or anything else. I have the config that I attached running. Any reason I could not get it going at this point or even ping it?
0
 
LVL 45

Expert Comment

by:Craig Beck
ID: 37817590
Can you ping the 2100 from your DHCP server?

What config is on your switch (specifically on the ports where the 2100 connects)?
0
 

Author Comment

by:Amirsys
ID: 37827785
I'm not able to ping from or to the 2100 and I have the local network connected on eather port 1 and it shows active with the connection lights
0

Featured Post

Backup Your Microsoft Windows Server®

Backup all your Microsoft Windows Server – on-premises, in remote locations, in private and hybrid clouds. Your entire Windows Server will be backed up in one easy step with patented, block-level disk imaging. We achieve RTOs (recovery time objectives) as low as 15 seconds.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

I recently purchased a Bluetooth headset called the Music Jogger (model BSH10). The control buttons on it look like this: One of my goals is to use it as the microphone and speakers for Skype calls. In that respect, it works well. However, I …
This article is a step by step guide on how to create a basic PTP link using Ubiquiti airOS devices. This guide can be used on the following Ubiquiti AirMAX devices. Nanostation, Bullets, AirBridge, Nanobeam, NanoBridge to name a few. Please review …
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

932 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

11 Experts available now in Live!

Get 1:1 Help Now