Solved

Server 2008 restore

Posted on 2012-04-07
3
196 Views
Last Modified: 2012-10-10
I am doing a mock server crash.  I have performed a bare metal backup of the current server and I am attempting to restore it onto a different server. (totally different hardware)  The backup was stored to an external hard drive which I believe has a USB 3 interface.  When I user the startup 2008 disc and chose repair, and then select restore PC, the system cannot find any backup (and it is plugged into the USB port).  However I did do a practice backup and restore on the spare (different server) using an external drive USB2 interface and it found the backup disc.  Is here an issue using USB3 interface and 2008 startup?
0
Comment
Question by:imajava
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
3 Comments
 
LVL 17

Expert Comment

by:Anuroopsundd
ID: 37819041
0
 
LVL 17

Accepted Solution

by:
James Haywood earned 500 total points
ID: 37820032
USB 3 drivers are not native with Server 2008. If you have the relevant drivers on a USB stick (not USB3) then you can manually load them before you select the backup image.
0
 

Author Comment

by:imajava
ID: 38481412
It all works like a charm
0

Featured Post

Free Tool: Port Scanner

Check which ports are open to the outside world. Helps make sure that your firewall rules are working as intended.

One of a set of tools we are providing to everyone as a way of saying thank you for being a part of the community.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

Title # Comments Views Activity
dnscache is required for Active directory replication? 3 64
Reverse DND setup 6 52
File Screening 1 31
Server Shares and Excel files 2 32
I was supporting a handful of Windows 2008 (non-R2) 2 node clusters with shared quorum disks. Some had SQL 2008 installed and some were just a vendor application that we supported. For the purposes of this article it doesn’t really matter which so w…
This article explains how to install and use the NTBackup utility that comes with Windows Server.
This tutorial will show how to push an installation of Backup Exec to an additional server in both 2012 and 2014 versions of the software. Click on the Backup Exec button in the upper left corner. From here, select Installation and Licensing, then I…
This tutorial will show how to configure a single USB drive with a separate folder for each day of the week. This will allow each of the backups to be kept separate preventing the previous day’s backup from being overwritten. The USB drive must be s…

763 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question