Solved

I would like to sych my server 2003 Callmanager (stand alone) with my local PDC

Posted on 2012-04-08
2
377 Views
Last Modified: 2012-06-21
I have tried to sync my stand alone windows servers with my PDC of the local domain, but it doesn't seem to take.  Here is a copy of my configuration for the ntp.conf file

server 214.13.192.1             # Set Local Clock to Authoritive Time Source
fudge 214.13.192.1  stratum 5      # Resets Stratum from default 3 to 5
driftfile C:\WINNT\system32\drivers\etc\ntp.drift      # path for drift file

here is the contents of my NTP drift
24.575

When I try to ping the PDC its fine but when I use the net time \\command (PDC ip address)I get the following

system error 5 has occured
access is denied
0
Comment
Question by:Captain-Jonas
2 Comments
 
LVL 35

Accepted Solution

by:
Cris Hanna earned 500 total points
ID: 37841894
when you say the call manager server is standalone...are you saying it is not joined to the domain that your "PDC" controls?
0

Featured Post

Complete VMware vSphere® ESX(i) & Hyper-V Backup

Capture your entire system, including the host, with patented disk imaging integrated with VMware VADP / Microsoft VSS and RCT. RTOs is as low as 15 seconds with Acronis Active Restore™. You can enjoy unlimited P2V/V2V migrations from any source (even from a different hypervisor)

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

#Citrix #Citrix Netscaler #HTTP Compression #Load Balance
Let’s list some of the technologies that enable smooth teleworking. 
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
Get a first impression of how PRTG looks and learn how it works.   This video is a short introduction to PRTG, as an initial overview or as a quick start for new PRTG users.

861 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

25 Experts available now in Live!

Get 1:1 Help Now