Solved

cisco switch iso change

Posted on 2012-04-09
3
637 Views
Last Modified: 2012-04-10
Hi, we have a 3750V2 switch with version 122.50
we would like to change the image to 122.35 so that it will stack with the other two switch.

when i dir flash, i can a folder c3750-ipbasek9-mz.122-50.SE1, under it there is a bin file with the same name.

my question can i delete the 122.50 bin and put 122.35 bin there without naming the folder?

thanks.

robin
0
Comment
Question by:robinyanwang
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
  • 2
3 Comments
 
LVL 10

Accepted Solution

by:
Netty earned 350 total points
ID: 37826162
(Sorry for my English)
Look at this:
"Q. What is the minimum Cisco IOS Software release required for the new series of switches?
A. The new series of switches is supported from Cisco IOS Software Release 12.2.50SE onward."
(http://www.cisco.com/en/US/prod/collateral/switches/ps5718/ps5528/qa_c67-527785_ps5023_Products_Q_and_A_Item.html)

As far as I know, there is no tight binding to the directory name. The .HTML files in this direcory used for HTML management of the switch.  If you don't use Cisco Network Assistance to manage the switch, then you don't need the HTML files. So, if you replace only IOS image (.bin file) web-management can not work. But I'm not sure.
0
 

Author Comment

by:robinyanwang
ID: 37828952
Hi, I removed the 122-50 and put the 122-35 there. the system won't bootup.
saying error loading image files...

my question turn out how do i put the 122-50 bin files back then? I use hyperterminal connecting to the console port.

thanks alot!!!
0
 

Author Comment

by:robinyanwang
ID: 37829106
got it, i am using xmodem to upload the bin files now...
0

Featured Post

Webinar: Aligning, Automating, Winning

Join Dan Russo, Senior Manager of Operations Intelligence, for an in-depth discussion on how Dealertrack, leading provider of integrated digital solutions for the automotive industry, transformed their DevOps processes to increase collaboration and move with greater velocity.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

Hi there, This article summarizes what you need if you are going to set up your home or small business Network Attached Storage (NAS) to be accessible from the internet. Of course there are configuration differences based on your NAS or router ma…
Arrow Electronics was searching for a KVM  (Keyboard/Video/Mouse) switch that could display on one single monitor the current status of all units being tested on the rack.
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

739 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question