Solved

How to setup a static VPN on a Juniper SRX210 to a Juniper SSG20

Posted on 2012-04-10
8
886 Views
Last Modified: 2012-11-23
Hi Guys,

Firstly i know nothing about Junipers but i need to setup 2 static VPN's from 2 remote locations that both have a Juniper SSG20 into a site with a new Juniper SRX210.
Can anyone point me in the right direction or to a guide without command line (i.e gui only)

Cheers
0
Comment
Question by:NotExperts
  • 3
  • 2
8 Comments
 
LVL 18

Expert Comment

by:deimark
ID: 37831148
For the SSG, have a look at http://kb.juniper.net/InfoCenter/index?page=content&id=KB22091

For the SRX look at http://kb.juniper.net/InfoCenter/index?page=content&id=KB21899

You have 2 main ways of setting up the VPN, and this will refer to how we want to implement it.  We can set up a route based or policy based VPN.  The main difference is how the VPN is invoked.  For route based, we use a route to send traffic to the tunnel interface and thus into the tunnel itself and with policy based, we use a policy to decide which traffic is sent over the VPN.  Both links above, have articles to explain how to create the VPN for each method plus how to troubleshoot it should it not work initially.

HTH
0
 

Author Comment

by:NotExperts
ID: 37836350
Thanks but the link for the SRX series is based around command line which i cannot get to grips with and so wanted something GUI based and simple. I've looked through these before.
Apologies for the lack of knowledge on these as i'm more used to working with Drayteks and Netgears etc hence the need for simplicity
I've attached a screenshot of the options i have
SRX210VPN.jpg
0
 
LVL 18

Accepted Solution

by:
deimark earned 500 total points
ID: 37869535
Have a look at this link bud
https://i2j.juniper.net/greenfield/jsp/index.jsp

In later versions of Junos you have a wizard to assist with the creation of VPNs and is accessed via Jweb (the web interface)

If you do not have the wizard, consider upgrading to a later version and retry.
0
 

Author Comment

by:NotExperts
ID: 38591771
I've requested that this question be deleted for the following reason:

Lost email access and details to Experts Exchange so have not re-visited account for months. Answer no longer needed.
0
 
LVL 18

Expert Comment

by:deimark
ID: 38591772
Answers given are still valid

Can the asker please double check to see if the answers we gave do apply to him even if not needed at this time?

If the answers are useful then please allocate points otherwise let us know what you did to answer your own question.

This will help others using EE
0

Featured Post

Netscaler Common Configuration How To guides

If you use NetScaler you will want to see these guides. The NetScaler How To Guides show administrators how to get NetScaler up and configured by providing instructions for common scenarios and some not so common ones.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

The Cisco RV042 router is a popular small network interfacing device that is often used as an internet gateway. Network administrators need to get at the management interface to make settings, change passwords, etc. This access is generally done usi…
If you use NetMotion Mobility on your PC and plan to upgrade to Windows 10, it may not work unless you take these steps.
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
Windows 10 is mostly good. However the one thing that annoys me is how many clicks you have to do to dial a VPN connection. You have to go to settings from the start menu, (2 clicks), Network and Internet (1 click), Click VPN (another click) then fi…

832 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question