Solved

Cisco ASA 5505 Appliance

Posted on 2012-04-10
10
498 Views
Last Modified: 2012-05-01
Hello-

I have a Cisco ASA 5505 Appliance that I would like to configure for vpn access into my company network. AT&T manages our MPLS Network. Any instructions or directional Guidance would be greatly appreciated.

Thanks in advance,

Robert
0
Comment
Question by:rbonds
  • 5
  • 5
10 Comments
 
LVL 35

Expert Comment

by:Ernie Beek
Comment Utility
Guides enough :-)

What exactly would you like to do?

Site to site.
Remote access VPN using a Cisco secure vpn client.
Web vpn or SSL.

Would you like to authenticate against an internal server.

You name it and I'm sure we can provide the guidance.
0
 

Author Comment

by:rbonds
Comment Utility
Thanks ernie for the suggestions. I would like Remote access VPN using a Cisco secure vpn client with Authentication coming from the Cisco Device itself. In other words, setting up users and passwords on the Cisco ASA 5505.

Hopefully, I provided enough info. If not, let me know what else is needed to better assist me.

Thanks again.

RB
0
 
LVL 35

Expert Comment

by:Ernie Beek
Comment Utility
One more thing (before I go to bed :), what version do you have? Is it <8.3 or >=8.3 ?
There are quite some differences introduced between those versions.
0
 

Author Comment

by:rbonds
Comment Utility
Ernie sorry for the late response back. 8.3
0
 
LVL 35

Accepted Solution

by:
Ernie Beek earned 500 total points
Comment Utility
No probs, I'm still here :)

I think the easiest way would be to use the ipsec vpn wizard in the ASDM.

Have a look at this doc I made and see if that works for you.
RAvpn.doc
0
Why You Should Analyze Threat Actor TTPs

After years of analyzing threat actor behavior, it’s become clear that at any given time there are specific tactics, techniques, and procedures (TTPs) that are particularly prevalent. By analyzing and understanding these TTPs, you can dramatically enhance your security program.

 

Author Comment

by:rbonds
Comment Utility
Thanks I will give that a shot and get back to you.

Best,

RB
0
 
LVL 35

Expert Comment

by:Ernie Beek
Comment Utility
I'll be here ;)
0
 

Author Comment

by:rbonds
Comment Utility
I'm all set, got a little guidance from AT&T but I'm good.

Thanks,

RB
0
 

Author Closing Comment

by:rbonds
Comment Utility
Thanks Erniebeek lol.
0
 
LVL 35

Expert Comment

by:Ernie Beek
Comment Utility
My pleasure :)
Thx 4 the points.
0

Featured Post

Threat Intelligence Starter Resources

Integrating threat intelligence can be challenging, and not all companies are ready. These resources can help you build awareness and prepare for defense.

Join & Write a Comment

This article will cover setting up redundant ISPs for outbound connectivity on an ASA 5510 (although the same should work on the 5520s and up as well).  It’s important to note that this covers outbound connectivity only.  The ASA does not have built…
Every server (virtual or physical) needs a console: and the console can be provided through hardware directly connected, software for remote connections, local connections, through a KVM, etc. This document explains the different types of consol…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

771 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

10 Experts available now in Live!

Get 1:1 Help Now