Solved

cisco 892 example config

Posted on 2012-04-11
5
1,666 Views
Last Modified: 2012-04-11
I am trying  to setup a cisco 892 router on a telstra bdsl lite service(adtran 832) , i have been given cust ip address of 110.142.226.110 , gateway 110.142.226.109 subnet 255.255.255.252.

Could some one give me an example config similar or a simple config just to get the internet going please , as Telstra will not give me an example config .
0
Comment
Question by:NWCCSteve
  • 3
  • 2
5 Comments
 
LVL 17

Expert Comment

by:Anuroopsundd
ID: 37831551
0
 
LVL 17

Accepted Solution

by:
Anuroopsundd earned 500 total points
ID: 37831584
!
hostname Internet-router
!
boot-start-marker
boot-end-marker
!
no aaa new-model
!
!
ip subnet-zero
ip cef
!
!
!
ip domain name mytest.com
ip name-server 201.283.22.1
!
!
!
!
interface FastEthernet0/0
 ip address 135.12.76.187 255.255.255.252
 speed 100
 full-duplex
!
interface FastEthernet0/1
 ip address 56.135.11.11 255.255.255.240
 duplex auto
 speed auto
!
ip classless
ip route 0.0.0.0 0.0.0.0 127.19.33.130
0
 
LVL 17

Expert Comment

by:Anuroopsundd
ID: 37831589
in above i just showed the ethernet port config and ip route.. which is basically required for start up internet.
0
 

Author Comment

by:NWCCSteve
ID: 37831838
I will get a copy of my config and paste as i have changed and still no joy !
0
 

Author Comment

by:NWCCSteve
ID: 37831888
thanks for your time , service provider has finally rang me back and has confirmed the ntu is not commissioned properly so they are going to get it fixed tommorrow , will try router again then . thanks again .
0

Featured Post

Windows Server 2016: All you need to know

Learn about Hyper-V features that increase functionality and usability of Microsoft Windows Server 2016. Also, throughout this eBook, you’ll find some basic PowerShell examples that will help you leverage the scripts in your environments!

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

There are two basic ways to configure a static route for Cisco IOS devices. I've written this article to highlight a case study comparing the configuration of a static route using the next-hop IP and the configuration of a static route using an outg…
How to set-up an On Demand, IPSec, Site to SIte, VPN from a Draytek Vigor Router to a Cyberoam UTM Appliance. A concise guide to the settings required on both devices
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

810 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question