Solved

Data Protection Manager Clients on Linksys E1200 Not Getting Synced

Posted on 2012-04-11
2
633 Views
Last Modified: 2012-06-21
I know this is long but I wanted to get as much info in.
We just added a Linksys E1200 on our network to provide wireless access to users that will allow the laptops to continue to communicate with our internal servers when they are not connected to the "wired" network which is connected to a Cisco ASA 5510.
The Linksys is just connected like all other clients through a TrndNet GB switch. The Linsys receives an DHCP IP (192.168.0/24) from the ASA and in turn gives clients an IP from it's own DHCP (192.168.4/24). All seems to be working for the laptops when on the wireless - Exchange, AD, Printing except for the actual syncing of files to our Data Protection Manager 2010 server.
.As soon as I connect a laptop to the wired (192.168.0) network it can sync. I also tried connecting a laptop through the port on the Linsys (wired) and still did not sync.

DPM is logging Event ID 10009 "DCOM was unable to communicate with the computer laptop.mydomain.dom using any of the configured protocols". To try to narrow this down I disabled the firewall on the DPM server, the laptops and the Linksys (under Security - SPI Firewall Inspection Disabled). I also disabled IPv6 using the registry hack but still have this problem. I don't know where else to look at on the Linksys as there is not much to configure. From what I've read this could be an issue with Dynamic RPC ports getting blocked.

The clients can see the DPM server as far as pinging or even mapping a drive to a share (it is also our Print server which works fine) so everything seems to be working except for the sync.

Is there anything that I am missing here?

Thanks!
0
Comment
Question by:johnnva
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
2 Comments
 

Author Comment

by:johnnva
ID: 37839065
I found out what the issue was. The 3/16/12 firmware update Linksys E1200 added Bridge support which allowed us to set up the network connection as a Bridge which then allowed the wireless clients to be on the same network and now DPM can sync to those clients.
0
 

Accepted Solution

by:
EE_AutoDeleter earned 0 total points
ID: 37924270
Because this question has no expert participation and is over 21 days old, it would have been deleted automatically, but you have posted information yourself making this PAQ-worthy.

EE_AutoDeleter
0

Featured Post

Guide to Performance: Optimization & Monitoring

Nowadays, monitoring is a mixture of tools, systems, and codes—making it a very complex process. And with this complexity, comes variables for failure. Get DZone’s new Guide to Performance to learn how to proactively find these variables and solve them before a disruption occurs.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

When it comes to security, there are always trade-offs between security and convenience/ease of administration. This article examines some of the main pros and cons of using key authentication vs password authentication for hosting an SFTP server.
This article is a collection of issues that people face from time to time and possible solutions to those issues. I hope you enjoy reading it.
Here's a very brief overview of the methods PRTG Network Monitor (https://www.paessler.com/prtg) offers for monitoring bandwidth, to help you decide which methods you´d like to investigate in more detail.  The methods are covered in more detail in o…
This video gives you a great overview about bandwidth monitoring with SNMP and WMI with our network monitoring solution PRTG Network Monitor (https://www.paessler.com/prtg). If you're looking for how to monitor bandwidth using netflow or packet s…

688 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question