Solved

Migration Enterprise Vault 8 to Enterprise Vault 9

Posted on 2012-04-12
1
1,148 Views
Last Modified: 2012-05-18
Hello Everybody

We have an existing Exchange 2003 with Enterprise Vault 8 environment.  I prepared a new environment in the same network with Exchange 2010 and Enterprise Vault 9.  Exchange 2003 is working fine with Exchange 2010.

Now I need to move / migrate / transform the archives based on the EV 8 infrastructure to the EV 9 infrastructure.  

Any suggestions about best practise or howto?

Thanks!
0
Comment
Question by:whenz
1 Comment
 
LVL 42

Accepted Solution

by:
paulsolov earned 500 total points
ID: 37837295
If you're using Discovery Accelerator it can get a little tricky. If not it's  a straight upgrade from EV8 to EV9 then add pre-requistes for Exchange (permissions, turn of throttling, etc..)

I would actually recommend going to EV 10, the new 64 bit indexing is much better.  For this you would need to go from EV8 to EV9 then to EV10.  The trick is that you need to be on Winodws 2008 R2 going forward.  

Also keep in mind that if you'll be using Outlook 2010 you'll need to use the HTTP only add-in, they don't have a DCOM add-in for it.
0

Featured Post

PRTG Network Monitor: Intuitive Network Monitoring

Network Monitoring is essential to ensure that computer systems and network devices are running. Use PRTG to monitor LANs, servers, websites, applications and devices, bandwidth, virtual environments, remote systems, IoT, and many more. PRTG is easy to set up & use.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

I was asked if I could set up a fax machine so that incoming faxes were delivered to people's Exchange inboxes and so that they could send faxes from their desktops without needing to print the document first.  I knew it was possible but I had no id…
Sometimes drives fill up and we don't know why.  If you don't understand the best way to use the tools available, you may end up being stumped as to why your drive says it's not full when you have no space left!  Here's how you can find out...
This tutorial will show how to push an installation of Backup Exec to an additional server in both 2012 and 2014 versions of the software. Click on the Backup Exec button in the upper left corner. From here, select Installation and Licensing, then I…
This tutorial will give a short introduction and overview of Backup Exec 2012 and how to navigate and perform basic functions. Click on the Backup Exec button in the upper left corner. From here, are global settings for the application such as conne…

809 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question