Ethernet MPLS service

Posted on 2012-04-12
Medium Priority
Last Modified: 2012-08-13
My client has a 7T1s private line connection to the MPLS service. The router has dial-peer VoIP implemented in it. Now, he wants to get new Cisco routers and move to an Ethernet MPLS service type of access. The pricing for 7 T1 card on a 2921 is $7K. So it makes sense to move to an ethernet to access to the MPLS cloud. I am not a voice guy so the big question is will my VoIP dial-peer be affected by this access change? Any thoughts would be appreciated. Thx
Question by:biggynet
1 Comment
LVL 15

Accepted Solution

wingatesl earned 2000 total points
ID: 37840467
you will want to make sure that the device is a voice capable router. There are a few gotchas, your best bet is to go with a voice bundle as they have the dsp resources installed. You may not need them and could get away with just a voice license, but it is such a small amount of money it is not worth it. Why not post a sanitized (public IPs) config and let us double-check it.

Featured Post

The 14th Annual Expert Award Winners

The results are in! Meet the top members of our 2017 Expert Awards. Congratulations to all who qualified!

Question has a verified solution.

Are you are experiencing a similar issue? Get a personalized answer when you ask a related question.

Have a better answer? Share it in a comment.

Join & Write a Comment

As companies replace their old PBX phone systems with Unified IP Communications, many are finding out that legacy applications such as fax do not work well with VoIP. Fortunately, Cloud Faxing provides a cost-effective alternative that works over an…
This article will show how Aten was able to supply easy management and control for Artear's video walls and wide range display configurations of their newsroom.
Here's a very brief overview of the methods PRTG Network Monitor (https://www.paessler.com/prtg) offers for monitoring bandwidth, to help you decide which methods you´d like to investigate in more detail.  The methods are covered in more detail in o…
This video gives you a great overview about bandwidth monitoring with SNMP and WMI with our network monitoring solution PRTG Network Monitor (https://www.paessler.com/prtg). If you're looking for how to monitor bandwidth using netflow or packet s…

619 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question