Solved

DNS Properties Name Server Tab

Posted on 2012-04-12
5
761 Views
Last Modified: 2012-09-04
What is the purpose of the Name Server tab in DNS for 2003 and 2008? All my DCs are DNS integrated with Active Directory.
0
Comment
Question by:AGenMIS
  • 3
  • 2
5 Comments
 
LVL 59

Expert Comment

by:Darius Ghassem
ID: 37839758
Name server tab:

Configure Zone Transfers using the Name Servers tab, and configure the Zone Transfers tab to transfer and notify the Name Servers of changes. Do not use Zone Transfers to IP Addresses
An Active Directory integrated DNS Server will replicate the Name Server information to each DNS server. As DNS servers are added or replaced this information is kept. When you only use the Zone Transfers tab and configure transfer by IP Address can result in loss of information if a DNS server is replaced.

http://blog.monitis.com/index.php/2011/10/18/best-practices-for-active-directory-integrated-dns/
0
 

Author Comment

by:AGenMIS
ID: 37930290
But do I have to configure the Name servers tab if all my DC's are integrated with DNS?
0
 
LVL 59

Accepted Solution

by:
Darius Ghassem earned 500 total points
ID: 37930514
No
0
 

Author Comment

by:AGenMIS
ID: 38053374
When I go to remove the server names from the Name tab, it ask me if I would like to remove the glue record for that server. How should I respond?
0
 
LVL 59

Expert Comment

by:Darius Ghassem
ID: 38064942
Leave it
0

Featured Post

PRTG Network Monitor: Intuitive Network Monitoring

Network Monitoring is essential to ensure that computer systems and network devices are running. Use PRTG to monitor LANs, servers, websites, applications and devices, bandwidth, virtual environments, remote systems, IoT, and many more. PRTG is easy to set up & use.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

There have been a lot of times when we have seen the need to enter a large number of DNS entries in a forward lookup zone. The standard procedure would be to launch the DNS Manager console, create the Zone and start adding new hosts using the New…
Restoring deleted objects in Active Directory has been a standard feature in Active Directory for many years, yet some admins may not know what is available.
This tutorial will show how to push an installation of Backup Exec to an additional server in both 2012 and 2014 versions of the software. Click on the Backup Exec button in the upper left corner. From here, select Installation and Licensing, then I…
This tutorial will walk an individual through configuring a drive on a Windows Server 2008 to perform shadow copies in order to quickly recover deleted files and folders. Click on Start and then select Computer to view the available drives on the se…

776 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question