Solved

Switch Stack-3750

Posted on 2012-04-12
5
486 Views
Last Modified: 2012-05-14
Possible to configure Switch Stack using below two switches? (Different Model and ports)

WS-C3750G-48PS and WS-C3750X-24S-E

With IP Services Softwares
0
Comment
Question by:sumod_jacob
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
  • 3
  • 2
5 Comments
 
LVL 15

Assisted Solution

by:Nayyar HH (CCIE RS)
Nayyar HH (CCIE RS) earned 500 total points
ID: 37841367
Yes you can - See notes below

"Note: A Cisco 3750 switch can be stacked with any other model of Cisco 3750 switches. Catalyst 3750 switches that run Cisco IOS® Release 12.2(25)SEB are compatible with Cisco EtherSwitch service modules that run Cisco IOS Release 12.2(25)EZ. Catalyst 3750 switches and Cisco EtherSwitch service modules can be in the same switch stack. Within this switch stack, the Catalyst 3750 switch or the Cisco EtherSwitch service module can be the stack master."
0
 

Author Comment

by:sumod_jacob
ID: 37841986
Does this also mean that, two ports number switches (48 and 24 ports) doesn't matter for stack configuration.
0
 
LVL 15

Expert Comment

by:Nayyar HH (CCIE RS)
ID: 37842016
Yes - That is correct.
0
 

Author Comment

by:sumod_jacob
ID: 37898004
Below IOS combination works for configuring stack?

 I have two switches with below IOS, what need to be do inorder to configure stack?

Switch1 Model =WS-C3750G-48PS    
Switch1 SW Ver =  C3750-IPSERVICESK9-M

Switch2 Model =WS-C3750X-24P-S
Switch1 SW Ver = Universal Image
0
 
LVL 15

Accepted Solution

by:
Nayyar HH (CCIE RS) earned 500 total points
ID: 37902289
If they have the same IOS image you can go ahead and connect stacking cable and configure switch stack


The link below discuss the requirement in detail

http://www.cisco.com/en/US/products/hw/switches/ps5023/products_configuration_example09186a00807811ad.shtml
0

Featured Post

IoT Devices - Fast, Cheap or Secure…Pick Two

The IoT market is growing at a rapid pace and manufacturers are under pressure to quickly provide new products. Can you be sure that your devices do what they're supposed to do, while still being secure?

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Security is one of the biggest concerns when moving and migrating your data from your on-premise location to the Public Cloud.  Where is your data? Who can access it? Will it be safe from accidental deletion?  All of these questions and more are imp…
WARNING:   If you follow the instructions here, you will wipe out your VTP and VLAN configurations.  Make sure you have backed up your switch!!! I recently had some issues with a few low-end Cisco routers (RV325) and I opened a case with Cisco TA…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

628 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question