Configuring the Access Point for the First Time

AymanOZ
AymanOZ used Ask the Experts™
on
How to Assign IP Address to Cisco wireless AP (1261N). to Access from Web GUI.
Note :my AP is just un-boxing, and it is not configured.
Comment
Watch Question

Do more with

Expert Office
EXPERT OFFICE® is a registered trademark of EXPERTS EXCHANGE®
Step 1 Start the browser.
Step 2 Enter the wireless device IP address in the browser Location field (Netscape Communicator) or Address field (Internet Explorer) and press Enter. The Summary Status page appears.

by default AP have ip of 192.168.1.1
so give your machine IP like 192.168.1.2 and open connect AP IP through browser.


for more details have a look at below link
http://www.cisco.com/en/US/docs/wireless/access_point/12.4.25d.JA/Configuration/guide/scg12.4.25d.JA-chap2-gui.html#wpxref64205

Author

Commented:
Mr. Anuroopsundd
this is not working see attachment

Note:
interface Dot11Radio0
 no ip address
 no ip route-cache
 shutdown
 antenna gain 0
!
interface GigabitEthernet0
 no ip address
 no ip route-cache
 duplex auto
!
interface BVI1
 ip address dhcp client-id GigabitEthernet0
 no ip route-cache

Open in new window

ap2.JPG
ap3.JPG

Do more with

Expert Office
Submit tech questions to Ask the Experts™ at any time to receive solutions, advice, and new ideas from leading industry professionals.

Start 7-Day Free Trial