Changing internal IP address of RRAS server

abhijitm00
abhijitm00 used Ask the Experts™
on
Hi Experts,

We have an existing dual homed RRAS server for which we need to change the IP address of the interface that gives the VPN addresses to clients and change the static address pool as well

Current setup:
IP address of first NIC -> 192.168.85.24
Default gateway - > 192.168.85.1
DNS - > 192.168.85.2, 192.168.85.3

IP address of second NIC -> 192.168.18.19
Default gateway -> 192.168.18.1
DHCP static pool for distribution -> 192.168.18.20 - .254

New setup:
No change in first NIC

IP address of second NIC -> 192.168.27.27
Default gateway -> 192.168.27.1
DHCP static pool for distribution -> 192.168.27.30 - .200

Will this only involve changing the IP address for the second NIC and removing existing DHCP scope and adding new one?

TIA
Comment
Watch Question

Do more with

Expert Office
EXPERT OFFICE® is a registered trademark of EXPERTS EXCHANGE®
Consultant
Commented:
Off the top of my head that should be fine.... When you say DHCP scope I assume you mean the IP Addresses for allocation in the RRAS setup not DHCP configuration in the actual DHCP Server

Author

Commented:
Hi Aoakeley, yes that is correct it is not the actual DHCP scope but the scope for VPN users

Author

Commented:
IP address change worked fine as mentioned above

Do more with

Expert Office
Submit tech questions to Ask the Experts™ at any time to receive solutions, advice, and new ideas from leading industry professionals.

Start 7-Day Free Trial