Can't ping ASA 5510 Standby IP from LAN

pndoyleuk
pndoyleuk used Ask the Experts™
on
I have 2 ASA5510 configured for failover. primary ip is 10.151.5.4 and standby is 10.151.5.5.
The problem is I cannot ping or ADSM to the passive .5 unit.
I am not sure if I am supposed to be able to ping.
Thanks
Comment
Watch Question

Do more with

Expert Office
EXPERT OFFICE® is a registered trademark of EXPERTS EXCHANGE®

Author

Commented:
I can ping from the Active ASA to 10.151.5.5 but not from the inside LAN
if you could provide a suitably sanitised copy of the config together with a cabling layout it would be useful.

Can you confirm that the inside interface of the secondary ASA as connected to the same VLAN as the primary ASA inside interface.

Author

Commented:
I've requested that this question be deleted for the following reason:

I found the fix myself, missing ACL was the problem

Do more with

Expert Office
Submit tech questions to Ask the Experts™ at any time to receive solutions, advice, and new ideas from leading industry professionals.

Start 7-Day Free Trial