asked on

HP motherboard - can't find type

Hello,

I've bought a motherboard (not a new one). Now I'm having a problem finding electrical schema of that motherboard on the internet, because I don't know how to connect power / reset / HDD.

It's a HP motherboard. What I've found written on the motherboard is:

'HP 2004 HPDC'
'929 REV 0H S26'

There is a serial:
SP#365865-001 P83860H9VR7RNZ AS#350929-001
DG#350930-000 REV 0H

But I still can't find schema. Here's the photo:

Best regards, Frenky

ASKER CERTIFIED SOLUTION

booster49

membership

Create a free account to see this answer

Signing up is free and takes 30 seconds. No credit card required.

See answer

AntonioRodrigo

ASKER

Thanks for answer. I have two pin power sw connector - no matter how I connect, I can't start the computer. I've connected power led just like schema says, page 148 and it works. But, I can't start computer. I've noticed that on power sw, reset sw and H.D.D. LED (all three of them are two pins), one wire is white. Is this GND? If so, according to schema, the computer should start, but nothing happens. Only green light flashes three times when I press start.

IanTh

three flashes suggest a memory problem

AntonioRodrigo

ASKER

The problem was that I hadn't connected processor power )) It happens. I did that and got the system running.

Now I can't get sound out of motherboard (integrated adi soundmax AC97 soundcard). I've alreday tried several drivers found on:

http://www.driveridentifier.com/scan/download.php?item_id=426686606&scanid=EC52DD1501DB4427B4ED79842B7256A3&hardware_id=pci%5Cven_8086%26dev_266E%26subsys_3005103C

I've tried all of the drivers and for each driver task manager said that it's ok - so basically my sound card is installed and ready to use -> but, it doesn't work.

booster49

Are you using the audio ports on your motherboard or the ones on the front of your PC?

AntonioRodrigo

ASKER

I am using audio ports. The problem was, that I didn't have pins attached to frnt aud - I've attached two pins and sound finally came.

Now I can't get USB to work. I've attached my both USB's on the frnt USB, but they don't work.