Link to home
Start Free TrialLog in
Avatar of catmr
catmr

asked on

hp designjet 130 nr

The HP designjet 130 , powers on, the carriage does not move and the error LED begins to blink immediately The LCD panel does not display any error code , and the 3 bars does not indicate a known error.I ran the diagnostic maintenance tool(printer-properties-advanced) and indicated error 258. This error does not exist in the service manual.
When the power it's on, if I open the lid, the carriage does not move at all. I can move the carriage with my hand, it's not stuck.

Need help!!!.
Avatar of nobus
nobus
Flag of Belgium image

error code 2 seems to be a problem with the carriage, so it can be a bad contact in the wires to the carriage motor, or a bad motor, or the logic board
more on it :  http://www.fixya.com/support/t13423888-hp_designjet_130nr_power_print_head
Avatar of catmr
catmr

ASKER

replaced electronic board and problem fixed
ASKER CERTIFIED SOLUTION
Avatar of nobus
nobus
Flag of Belgium image

Link to home
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
Start Free Trial