Link to home
Start Free TrialLog in
Avatar of SilverStarComm
SilverStarCommFlag for United States of America

asked on

HP Procurve and Radius through windows 2008 r2

I have radius configured on the switch and i believe on the server but when i try to authenticate the error is IAS_No_Policy_Match. is there anything special when creating the policies on the NPS server for the HP Procurve's.
Avatar of arnold
arnold
Flag of United States of America image

You have to make sure the request matches the check items you setup.
Debug the requests that came in.
is this for 802.1x or for management access to the switch ?

which model switch is it ?
Avatar of SilverStarComm

ASKER

okay i now can connect but it isn't sending the privelege elevation....is there a string to send once authenticated through radius like with cisco you set shell:priv-lvl=15. Does Hp have something like that?

i use 2910al switches
from here  page 169

I think you need the "login privilege-mode" command
thank you ....where in the windows 2008 IAS do you specify the service-type to 6 or 7...if i take the aaa authentication mode out i am able to connect. i would like to send it from radius server but there isn't a vendor specific entry for HP
You would need to take that up with Microsoft and HP.
ASKER CERTIFIED SOLUTION
Avatar of Nobody0212
Nobody0212
Flag of United States of America image

Link to home
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
Start Free Trial