<div>
When you click Add Storage, does the LUN Appear?
</div>


<div>
have you tried on the iscsi storage adapter clicked refresh and set the iscsi discovery properly<br />
<br />
did you in openfiler add the hosts uuid to the iscsi target ?
</div>


<div>
i did try to refresh and set the iscsi discovery properly. <br />
<br />
i didn't add the host uuid. how would i do that?
</div>


<div>
did you read the comments there are some interesting things to try<br />
<br />
by the way is your of a vm if so you may need to do on the vswitch promiscuous enable and vlan all
</div>


<div>
&quot;did you in openfiler add the hosts uuid to the iscsi target ?&quot;<br />
<br />
I don't see an option to add host uuid. Please see my attachment of current configuration. <br />
<br />
<br />
&quot;by the way is your of a vm if so you may need to do on the vswitch promiscuous enable and vlan all&quot;<br />
<br />
Do i need to do this option even if i don't have any vlan setup. i am just using my LAN. <br />
no VLAN configured yet.
</div>


<div>
see attached.<br />
<a href="https://filedb.experts-exchange.com/incoming/2012/07_w28/588064/iscsi-config-ACL.jpg" target="_blank" class="file-inline" title="iscsi-acl (23 KB)"><svg xmlns="http://www.w3.org/2000/svg" viewBox="0 0 512 512"><path d="M67.508 468.467c-58.005-58.013-58.016-151.92 0-209.943l225.011-225.04c44.643-44.645 117.279-44.645 161.92 0 44.743 44.749 44.753 117.186 0 161.944l-189.465 189.49c-31.41 31.413-82.518 31.412-113.926.001-31.479-31.482-31.49-82.453 0-113.944L311.51 110.491c4.687-4.687 12.286-4.687 16.972 0l16.967 16.971c4.685 4.686 4.685 12.283 0 16.969L184.983 304.917c-12.724 12.724-12.73 33.328 0 46.058 12.696 12.697 33.356 12.699 46.054-.001l189.465-189.489c25.987-25.989 25.994-68.06.001-94.056-25.931-25.934-68.119-25.932-94.049 0l-225.01 225.039c-39.249 39.252-39.258 102.795-.001 142.057 39.285 39.29 102.885 39.287 142.162-.028A739446.174 739446.174 0 0 1 439.497 238.49c4.686-4.687 12.282-4.684 16.969.004l16.967 16.971c4.685 4.686 4.689 12.279.004 16.965a755654.128 755654.128 0 0 0-195.881 195.996c-58.034 58.092-152.004 58.093-210.048.041z"/></svg>iscsi-config-ACL.jpg</a>
</div>


iscsi-config-ACL.jpg

<div>
vSwitch configuration is irrelevant here, it's not a vritual ESXi server.<br />
<br />
Have you setup iSCSI correctly on the host?<br />
<br />
check my video for EE Members<br />
<br />
Video Tutorial - Adding iSCSI storage to a VMware vSphere ESX/ESXi 4.x host server<br />
<a href="http://andysworld.org.uk/2011/06/24/new-hd-video-adding-iscsi-storage-to-a-vmware-vsphere-esxesxi-4x-host-server/" rel="ugc">http://andysworld.org.uk/2011/06/24/new-hd-video-adding-iscsi-storage-to-a-vmware-vsphere-esxesxi-4x-host-server/</a>
</div>


<div>
Sorry I was getting confused <br />
my esx are vm's I had to use promiscuous enabled and vlan all 4096 for the virtual esx hosts to connect to my iscsi server sorry<br />
<br />
did you see in the comments that the subnet had to be 255.255.255.255 to work ?
</div>


<div>
I followed every single step from here. <br />
<br />
I still can't see my LUN visible to the host. <br />
<br />
<a href="http://www.techhead.co.uk/how-to-configure-openfiler-v23-iscsi-storage-for-use-with-vmware-esx" rel="ugc">http://www.techhead.co.uk/how-to-configure-openfiler-v23-iscsi-storage-for-use-with-vmware-esx</a>
</div>


<div>
see attached.<br />
<a href="https://filedb.experts-exchange.com/incoming/2012/07_w28/588096/LUN-mapping.jpg" target="_blank" class="file-inline" title="Lun-mapping (29 KB)"><svg xmlns="http://www.w3.org/2000/svg" viewBox="0 0 512 512"><path d="M67.508 468.467c-58.005-58.013-58.016-151.92 0-209.943l225.011-225.04c44.643-44.645 117.279-44.645 161.92 0 44.743 44.749 44.753 117.186 0 161.944l-189.465 189.49c-31.41 31.413-82.518 31.412-113.926.001-31.479-31.482-31.49-82.453 0-113.944L311.51 110.491c4.687-4.687 12.286-4.687 16.972 0l16.967 16.971c4.685 4.686 4.685 12.283 0 16.969L184.983 304.917c-12.724 12.724-12.73 33.328 0 46.058 12.696 12.697 33.356 12.699 46.054-.001l189.465-189.489c25.987-25.989 25.994-68.06.001-94.056-25.931-25.934-68.119-25.932-94.049 0l-225.01 225.039c-39.249 39.252-39.258 102.795-.001 142.057 39.285 39.29 102.885 39.287 142.162-.028A739446.174 739446.174 0 0 1 439.497 238.49c4.686-4.687 12.282-4.684 16.969.004l16.967 16.971c4.685 4.686 4.689 12.279.004 16.965a755654.128 755654.128 0 0 0-195.881 195.996c-58.034 58.092-152.004 58.093-210.048.041z"/></svg>LUN-mapping.jpg</a>
</div>


LUN-mapping.jpg

<div>
I installed openfiler 2.99<br />
<br />
created a LUN and mapped the LUN <br />
<br />
when i went to scan and tried to add the LUN, i don't see any LUN showing up. <br />
<br />
I am not sure what is preventing to see the target.
</div>


<div>
see attached<br />
<a href="https://filedb.experts-exchange.com/incoming/2012/07_w28/588137/networking.jpg" target="_blank" class="file-inline" title="networking (38 KB)"><svg xmlns="http://www.w3.org/2000/svg" viewBox="0 0 512 512"><path d="M67.508 468.467c-58.005-58.013-58.016-151.92 0-209.943l225.011-225.04c44.643-44.645 117.279-44.645 161.92 0 44.743 44.749 44.753 117.186 0 161.944l-189.465 189.49c-31.41 31.413-82.518 31.412-113.926.001-31.479-31.482-31.49-82.453 0-113.944L311.51 110.491c4.687-4.687 12.286-4.687 16.972 0l16.967 16.971c4.685 4.686 4.685 12.283 0 16.969L184.983 304.917c-12.724 12.724-12.73 33.328 0 46.058 12.696 12.697 33.356 12.699 46.054-.001l189.465-189.489c25.987-25.989 25.994-68.06.001-94.056-25.931-25.934-68.119-25.932-94.049 0l-225.01 225.039c-39.249 39.252-39.258 102.795-.001 142.057 39.285 39.29 102.885 39.287 142.162-.028A739446.174 739446.174 0 0 1 439.497 238.49c4.686-4.687 12.282-4.684 16.969.004l16.967 16.971c4.685 4.686 4.689 12.279.004 16.965a755654.128 755654.128 0 0 0-195.881 195.996c-58.034 58.092-152.004 58.093-210.048.041z"/></svg>networking.jpg</a>
</div>


networking.jpg

<div>
can the esx host ping the of from the alt f1 console in v5 you have to enable it in vcenter server
</div>


<div>
need to see the properties especially the iscsi settings of vswitch 0
</div>


<div>
can you give me the steps to take a snap shot of iSCSI setting of vswitch0
</div>


<div>
if you using win7 just type in run snipping tool as that will give you a way of cutting part of the screen into a jpg
</div>


<div>
i already have the tool. I am not sure what setting are you looking for in vswitch0.<br />
<br />
please let me know.
</div>


<div>
<br />
<a href="https://filedb.experts-exchange.com/incoming/2012/07_w28/588237/iSCSI-adapter-setting-1.jpg" target="_blank" class="file-inline" title="iSCSI-adapter-setting-1 (35 KB)"><svg xmlns="http://www.w3.org/2000/svg" viewBox="0 0 512 512"><path d="M67.508 468.467c-58.005-58.013-58.016-151.92 0-209.943l225.011-225.04c44.643-44.645 117.279-44.645 161.92 0 44.743 44.749 44.753 117.186 0 161.944l-189.465 189.49c-31.41 31.413-82.518 31.412-113.926.001-31.479-31.482-31.49-82.453 0-113.944L311.51 110.491c4.687-4.687 12.286-4.687 16.972 0l16.967 16.971c4.685 4.686 4.685 12.283 0 16.969L184.983 304.917c-12.724 12.724-12.73 33.328 0 46.058 12.696 12.697 33.356 12.699 46.054-.001l189.465-189.489c25.987-25.989 25.994-68.06.001-94.056-25.931-25.934-68.119-25.932-94.049 0l-225.01 225.039c-39.249 39.252-39.258 102.795-.001 142.057 39.285 39.29 102.885 39.287 142.162-.028A739446.174 739446.174 0 0 1 439.497 238.49c4.686-4.687 12.282-4.684 16.969.004l16.967 16.971c4.685 4.686 4.689 12.279.004 16.965a755654.128 755654.128 0 0 0-195.881 195.996c-58.034 58.092-152.004 58.093-210.048.041z"/></svg>iSCSI-adapter-setting-1.jpg</a><br />
<a href="https://filedb.experts-exchange.com/incoming/2012/07_w28/588238/iSCSI-adapter-setting-2.jpg" target="_blank" class="file-inline" title="iSCSI-adapter-setting-2 (56 KB)"><svg xmlns="http://www.w3.org/2000/svg" viewBox="0 0 512 512"><path d="M67.508 468.467c-58.005-58.013-58.016-151.92 0-209.943l225.011-225.04c44.643-44.645 117.279-44.645 161.92 0 44.743 44.749 44.753 117.186 0 161.944l-189.465 189.49c-31.41 31.413-82.518 31.412-113.926.001-31.479-31.482-31.49-82.453 0-113.944L311.51 110.491c4.687-4.687 12.286-4.687 16.972 0l16.967 16.971c4.685 4.686 4.685 12.283 0 16.969L184.983 304.917c-12.724 12.724-12.73 33.328 0 46.058 12.696 12.697 33.356 12.699 46.054-.001l189.465-189.489c25.987-25.989 25.994-68.06.001-94.056-25.931-25.934-68.119-25.932-94.049 0l-225.01 225.039c-39.249 39.252-39.258 102.795-.001 142.057 39.285 39.29 102.885 39.287 142.162-.028A739446.174 739446.174 0 0 1 439.497 238.49c4.686-4.687 12.282-4.684 16.969.004l16.967 16.971c4.685 4.686 4.689 12.279.004 16.965a755654.128 755654.128 0 0 0-195.881 195.996c-58.034 58.092-152.004 58.093-210.048.041z"/></svg>iSCSI-adapter-setting-2.jpg</a><br />
<a href="https://filedb.experts-exchange.com/incoming/2012/07_w28/588239/iSCSI-adapter-setting-3.jpg" target="_blank" class="file-inline" title="iSCSI-adapter-setting-3 (34 KB)"><svg xmlns="http://www.w3.org/2000/svg" viewBox="0 0 512 512"><path d="M67.508 468.467c-58.005-58.013-58.016-151.92 0-209.943l225.011-225.04c44.643-44.645 117.279-44.645 161.92 0 44.743 44.749 44.753 117.186 0 161.944l-189.465 189.49c-31.41 31.413-82.518 31.412-113.926.001-31.479-31.482-31.49-82.453 0-113.944L311.51 110.491c4.687-4.687 12.286-4.687 16.972 0l16.967 16.971c4.685 4.686 4.685 12.283 0 16.969L184.983 304.917c-12.724 12.724-12.73 33.328 0 46.058 12.696 12.697 33.356 12.699 46.054-.001l189.465-189.489c25.987-25.989 25.994-68.06.001-94.056-25.931-25.934-68.119-25.932-94.049 0l-225.01 225.039c-39.249 39.252-39.258 102.795-.001 142.057 39.285 39.29 102.885 39.287 142.162-.028A739446.174 739446.174 0 0 1 439.497 238.49c4.686-4.687 12.282-4.684 16.969.004l16.967 16.971c4.685 4.686 4.689 12.279.004 16.965a755654.128 755654.128 0 0 0-195.881 195.996c-58.034 58.092-152.004 58.093-210.048.041z"/></svg>iSCSI-adapter-setting-3.jpg</a><br />
<a href="https://filedb.experts-exchange.com/incoming/2012/07_w28/588240/iSCSI-adapter-setting-4.jpg" target="_blank" class="file-inline" title="iSCSI-adapter-setting-4 (31 KB)"><svg xmlns="http://www.w3.org/2000/svg" viewBox="0 0 512 512"><path d="M67.508 468.467c-58.005-58.013-58.016-151.92 0-209.943l225.011-225.04c44.643-44.645 117.279-44.645 161.92 0 44.743 44.749 44.753 117.186 0 161.944l-189.465 189.49c-31.41 31.413-82.518 31.412-113.926.001-31.479-31.482-31.49-82.453 0-113.944L311.51 110.491c4.687-4.687 12.286-4.687 16.972 0l16.967 16.971c4.685 4.686 4.685 12.283 0 16.969L184.983 304.917c-12.724 12.724-12.73 33.328 0 46.058 12.696 12.697 33.356 12.699 46.054-.001l189.465-189.489c25.987-25.989 25.994-68.06.001-94.056-25.931-25.934-68.119-25.932-94.049 0l-225.01 225.039c-39.249 39.252-39.258 102.795-.001 142.057 39.285 39.29 102.885 39.287 142.162-.028A739446.174 739446.174 0 0 1 439.497 238.49c4.686-4.687 12.282-4.684 16.969.004l16.967 16.971c4.685 4.686 4.689 12.279.004 16.965a755654.128 755654.128 0 0 0-195.881 195.996c-58.034 58.092-152.004 58.093-210.048.041z"/></svg>iSCSI-adapter-setting-4.jpg</a>
</div>


iSCSI-adapter-setting-4.jpg

iSCSI-adapter-setting-3.jpg

iSCSI-adapter-setting-1.jpg

iSCSI-adapter-setting-2.jpg

<div>
here is my iSCSI adapter settings. <br />
<br />
Let me know if that what you are asking for.
</div>


<div>
do you have any iSCSI open session on the Openfiler SAN from ESX server?<br />
<br />
can you ping and vmkping the SAN from ESX server?<br />
<br />
you have also assigned ACLs and Network share to the iSCSI volume in the SAN config?<br />
<br />
Make sure you Assign a Full Network Share<br />
<br />
e.g. 192.168.1.0 255.255.255.0 Share<br />
<br />
and Allow this under iSCSI Targets
</div>


<div>
i was able to ping and vmkping the from esxi <br />
<br />
<br />
~ # vmkping 10.10.10.47<br />
PING 10.10.10.47 (10.10.10.47): 56 data bytes<br />
64 bytes from 10.10.10.47: icmp_seq=0 ttl=64 time=0.763 ms<br />
64 bytes from 10.10.10.47: icmp_seq=1 ttl=64 time=0.322 ms<br />
<br />
--- 10.10.10.47 ping statistics ---<br />
2 packets transmitted, 2 packets received, 0% packet loss<br />
round-trip min/avg/max = 0.322/0.542/0.763 ms
</div>


<div>
can you ping and vmkping the SAN from ESX server?<br />
yes. confirmed.<br />
<br />
you have also assigned ACLs and Network share to the iSCSI volume in the SAN config?<br />
please see the screenshot attached. <br />
<br />
<br />
How would i check this? please assist. <br />
<br />
1. do you have any iSCSI open session on the Openfiler SAN from ESX server?<br />
<br />
2.<br />
Make sure you Assign a Full Network Share<br />
<br />
e.g. 192.168.1.0 255.255.255.0 Share<br />
<br />
and Allow this under iSCSI Targets<br />
<a href="https://filedb.experts-exchange.com/incoming/2012/07_w28/588262/ACL-network.jpg" target="_blank" class="file-inline" title="ACL-Network1 (20 KB)"><svg xmlns="http://www.w3.org/2000/svg" viewBox="0 0 512 512"><path d="M67.508 468.467c-58.005-58.013-58.016-151.92 0-209.943l225.011-225.04c44.643-44.645 117.279-44.645 161.92 0 44.743 44.749 44.753 117.186 0 161.944l-189.465 189.49c-31.41 31.413-82.518 31.412-113.926.001-31.479-31.482-31.49-82.453 0-113.944L311.51 110.491c4.687-4.687 12.286-4.687 16.972 0l16.967 16.971c4.685 4.686 4.685 12.283 0 16.969L184.983 304.917c-12.724 12.724-12.73 33.328 0 46.058 12.696 12.697 33.356 12.699 46.054-.001l189.465-189.489c25.987-25.989 25.994-68.06.001-94.056-25.931-25.934-68.119-25.932-94.049 0l-225.01 225.039c-39.249 39.252-39.258 102.795-.001 142.057 39.285 39.29 102.885 39.287 142.162-.028A739446.174 739446.174 0 0 1 439.497 238.49c4.686-4.687 12.282-4.684 16.969.004l16.967 16.971c4.685 4.686 4.689 12.279.004 16.965a755654.128 755654.128 0 0 0-195.881 195.996c-58.034 58.092-152.004 58.093-210.048.041z"/></svg>ACL-network.jpg</a><br />
<a href="https://filedb.experts-exchange.com/incoming/2012/07_w28/588263/ACL-network-1.jpg" target="_blank" class="file-inline" title="ACL-network2 (21 KB)"><svg xmlns="http://www.w3.org/2000/svg" viewBox="0 0 512 512"><path d="M67.508 468.467c-58.005-58.013-58.016-151.92 0-209.943l225.011-225.04c44.643-44.645 117.279-44.645 161.92 0 44.743 44.749 44.753 117.186 0 161.944l-189.465 189.49c-31.41 31.413-82.518 31.412-113.926.001-31.479-31.482-31.49-82.453 0-113.944L311.51 110.491c4.687-4.687 12.286-4.687 16.972 0l16.967 16.971c4.685 4.686 4.685 12.283 0 16.969L184.983 304.917c-12.724 12.724-12.73 33.328 0 46.058 12.696 12.697 33.356 12.699 46.054-.001l189.465-189.489c25.987-25.989 25.994-68.06.001-94.056-25.931-25.934-68.119-25.932-94.049 0l-225.01 225.039c-39.249 39.252-39.258 102.795-.001 142.057 39.285 39.29 102.885 39.287 142.162-.028A739446.174 739446.174 0 0 1 439.497 238.49c4.686-4.687 12.282-4.684 16.969.004l16.967 16.971c4.685 4.686 4.689 12.279.004 16.965a755654.128 755654.128 0 0 0-195.881 195.996c-58.034 58.092-152.004 58.093-210.048.041z"/></svg>ACL-network-1.jpg</a>
</div>


ACL-network-1.jpg

ACL-network.jpg

<div>
I would not assign nodes, like that in Openfiler.<br />
<br />
I would assign the whole network subnet.<br />
<br />
so 10.10.10.0 255.255.255.0 Share<br />
<br />
adding specific nodes seems to be broke after 2.3!<br />
<br />
so change that, and then change the other to Allow for above config, and give that a go!
</div>


<div>
actually my subnet mask &nbsp;is 255.0.0.0 for my network. <br />
<br />
i have changed the ACL to network. please see the attachment. <br />
<br />
still i am unable to see the LUN.<br />
<a href="https://filedb.experts-exchange.com/incoming/2012/07_w28/588273/ACL-network-3.jpg" target="_blank" class="file-inline" title="ACL-network-3.jpg (14 KB)"><svg xmlns="http://www.w3.org/2000/svg" viewBox="0 0 512 512"><path d="M67.508 468.467c-58.005-58.013-58.016-151.92 0-209.943l225.011-225.04c44.643-44.645 117.279-44.645 161.92 0 44.743 44.749 44.753 117.186 0 161.944l-189.465 189.49c-31.41 31.413-82.518 31.412-113.926.001-31.479-31.482-31.49-82.453 0-113.944L311.51 110.491c4.687-4.687 12.286-4.687 16.972 0l16.967 16.971c4.685 4.686 4.685 12.283 0 16.969L184.983 304.917c-12.724 12.724-12.73 33.328 0 46.058 12.696 12.697 33.356 12.699 46.054-.001l189.465-189.489c25.987-25.989 25.994-68.06.001-94.056-25.931-25.934-68.119-25.932-94.049 0l-225.01 225.039c-39.249 39.252-39.258 102.795-.001 142.057 39.285 39.29 102.885 39.287 142.162-.028A739446.174 739446.174 0 0 1 439.497 238.49c4.686-4.687 12.282-4.684 16.969.004l16.967 16.971c4.685 4.686 4.689 12.279.004 16.965a755654.128 755654.128 0 0 0-195.881 195.996c-58.034 58.092-152.004 58.093-210.048.041z"/></svg>ACL-network-3.jpg</a><br />
<a href="https://filedb.experts-exchange.com/incoming/2012/07_w28/588274/ACL-network-4.jpg" target="_blank" class="file-inline" title="ACL-network-3.jpg (19 KB)"><svg xmlns="http://www.w3.org/2000/svg" viewBox="0 0 512 512"><path d="M67.508 468.467c-58.005-58.013-58.016-151.92 0-209.943l225.011-225.04c44.643-44.645 117.279-44.645 161.92 0 44.743 44.749 44.753 117.186 0 161.944l-189.465 189.49c-31.41 31.413-82.518 31.412-113.926.001-31.479-31.482-31.49-82.453 0-113.944L311.51 110.491c4.687-4.687 12.286-4.687 16.972 0l16.967 16.971c4.685 4.686 4.685 12.283 0 16.969L184.983 304.917c-12.724 12.724-12.73 33.328 0 46.058 12.696 12.697 33.356 12.699 46.054-.001l189.465-189.489c25.987-25.989 25.994-68.06.001-94.056-25.931-25.934-68.119-25.932-94.049 0l-225.01 225.039c-39.249 39.252-39.258 102.795-.001 142.057 39.285 39.29 102.885 39.287 142.162-.028A739446.174 739446.174 0 0 1 439.497 238.49c4.686-4.687 12.282-4.684 16.969.004l16.967 16.971c4.685 4.686 4.689 12.279.004 16.965a755654.128 755654.128 0 0 0-195.881 195.996c-58.034 58.092-152.004 58.093-210.048.041z"/></svg>ACL-network-4.jpg</a>
</div>


ACL-network-4.jpg

ACL-network-3.jpg

<div>
no in the of the subnet &nbsp;on the forum it says to use 255.255.255.255 to get it working only in of though
</div>


<div>
do you want me to change the subnet to 255.255.255.255 instead of 255.0.0.0?<br />
<br />
please confirm.
</div>


<div>
only in openfiler yes<br />
<br />
not your network
</div>


<div>
I did update the network setting. see attached. <br />
<br />
still no luck.<br />
<a href="https://filedb.experts-exchange.com/incoming/2012/07_w28/588284/ACL-network-5.jpg" target="_blank" class="file-inline" title="ACL-network-5.jpg (18 KB)"><svg xmlns="http://www.w3.org/2000/svg" viewBox="0 0 512 512"><path d="M67.508 468.467c-58.005-58.013-58.016-151.92 0-209.943l225.011-225.04c44.643-44.645 117.279-44.645 161.92 0 44.743 44.749 44.753 117.186 0 161.944l-189.465 189.49c-31.41 31.413-82.518 31.412-113.926.001-31.479-31.482-31.49-82.453 0-113.944L311.51 110.491c4.687-4.687 12.286-4.687 16.972 0l16.967 16.971c4.685 4.686 4.685 12.283 0 16.969L184.983 304.917c-12.724 12.724-12.73 33.328 0 46.058 12.696 12.697 33.356 12.699 46.054-.001l189.465-189.489c25.987-25.989 25.994-68.06.001-94.056-25.931-25.934-68.119-25.932-94.049 0l-225.01 225.039c-39.249 39.252-39.258 102.795-.001 142.057 39.285 39.29 102.885 39.287 142.162-.028A739446.174 739446.174 0 0 1 439.497 238.49c4.686-4.687 12.282-4.684 16.969.004l16.967 16.971c4.685 4.686 4.689 12.279.004 16.965a755654.128 755654.128 0 0 0-195.881 195.996c-58.034 58.092-152.004 58.093-210.048.041z"/></svg>ACL-network-5.jpg</a>
</div>


ACL-network-5.jpg

<div>
try 10.10.10.0 255.255.255.0 Share<br />
<br />
try 10.10.10.0 255.0.0.0 Share
</div>


<div>
you do have a VMKernel Portgroup, which has an IP address in this network range?
</div>


<div>
actually just thought have put the ip address of the iscsi adapter discovery set the ip address of your of server
</div>


<div>
After I did this its working.<br />
<br />
You guys are best. <br />
<br />
can you explain the theory behind the scene. <br />
<br />
<br />
try 10.10.10.0 255.255.255.0 Share<br />
<br />
try 10.10.10.0 255.0.0.0 Share
</div>


<div>
Yes, it's broke in Openfiler 2.99!
</div>


<div>
that's just how ee works eh ?<br />
<br />
does openfiler now have vfs ?
</div>


<div>
<div class="content wysiwyg-content">
Hi,<br />
<br />
I installed openfiler and created a LUN and mapped the LUN. <br />
<br />
when i go to storage under and tried to add the LUN it is not showing up. <br />
<br />
I am not sure what i am missing. can someone help me. <br />
<br />
<a href="http://www.techhead.co.uk/how-to-configure-openfiler-v23-iscsi-storage-for-use-with-vmware-esx" rel="ugc">http://www.techhead.co.uk/how-to-configure-openfiler-v23-iscsi-storage-for-use-with-vmware-esx</a>
</div>
</div>


Hi,

I installed openfiler and created a LUN and mapped the LUN. 

when i go to storage under and tried to add the LUN it is not showing up. 

I am not sure what i am missing. can someone help me. 

http://www.techhead.co.uk/how-to-configure-openfiler-v23-iscsi-storage-for-use-with-vmware-esx

openfiler - SAN

VMware, a software company founded in 1998,  was one of the first commercially successful companies to offer x86 virtualization. The storage company EMC purchased VMware in 1994. Dell Technologies acquired EMC in 2016. VMware’s parent company is now Dell Technologies.

VMware has many software products that run on desktops, Microsoft Windows, Linux, and macOS, which allows the virtualizing of the x86 architecture.  Its enterprise software hypervisor for servers, VMware vSphere Hypervisor (ESXi), is a bare-metal hypervisor that runs directly on the server hardware and does not require an additional underlying operating system.