?
Solved

Openvpn on Pfsense client connects to remote network but can only see 3 machines out of 50q

Posted on 2012-08-11
4
Medium Priority
?
2,651 Views
Last Modified: 2012-08-21
Hi everyone,

I have openvpn on Pfsense configured and client is connecting to the destination network however, I'm only able to connect to 3 machines out of 50. also browser don't have Internet but the PC does.

The remote and client machines have the same subnet however, I tried connecting on 3G using guizmo openvpn on iPhone but the same thing happens, and connecting my computer with 3G but to no avail.

Could anyone direct me to where is  the problem and why 3 IPs only are connecting ?
Thanks
0
Comment
Question by:Mohammed Hamada
  • 3
4 Comments
 
LVL 10

Expert Comment

by:asavah
ID: 38283466
Provide your settings for OpenVPN server with a screenshot. I use pfsense at some sites and when properly configured I didn't have any problems.

Our psychic abilities to guess settings are very limited :)
0
 
LVL 24

Author Comment

by:Mohammed Hamada
ID: 38283853
Yes true Asavah, my apologize i forgot to post it.
Server conf are attached snapshots and Here's my Client settings

dev tun
persist-tun
persist-key
proto udp
cipher BF-CBC
tls-client
client
resolv-retry infinite
remote 95.x.x.x 1194
tls-remote vpnnew.mydomain.com
pkcs12 pfsens-udp-1194.p12
tls-auth pfsens-udp-1194-tls.key 1
comp-lzo
openvpn1.png
openvpn2.png
0
 
LVL 24

Accepted Solution

by:
Mohammed Hamada earned 0 total points
ID: 38302646
I figured it out, basically I have one Pfsense at work with OPENVPN setup and in the office network there are 50 virtual servers! I wanna be able to connect to these servers.

After I changed one of the Virtual server's gateway to Pfsene's local IP, the VPN client could see that virtual server and ping it and connect to it..

 I have added to those machines the following route command and it seems to solve the issue! I don't need to change the gateway of the machine for the openvpn client to see it anymore..

netsh interface ipv4 add route 192.168.0.0/24 "Local Area Connection" 192.168.1.40
netsh interface ipv4 add route 172.16.0.0/16 "Local Area Connection" 192.168.1.40

thanks for the contribution.
0
 
LVL 24

Author Closing Comment

by:Mohammed Hamada
ID: 38315500
Self Managed
0

Featured Post

Concerto Cloud for Software Providers & ISVs

Can Concerto Cloud Services help you focus on evolving your application offerings, while delivering the best cloud experience to your customers? From DevOps to revenue models and customer support, the answer is yes!

Learn how Concerto can help you.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

OpenVPN is a great open source VPN server that is capable of providing quick and easy VPN access to your network on the cheap.  By default the software is configured to allow open access to your network.  But what if you want to restrict users to on…
This article offers some helpful and general tips for safe browsing and online shopping. It offers simple and manageable procedures that help to ensure the safety of one's personal information and the security of any devices.
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
Michael from AdRem Software explains how to view the most utilized and worst performing nodes in your network, by accessing the Top Charts view in NetCrunch network monitor (https://www.adremsoft.com/). Top Charts is a view in which you can set seve…
Suggested Courses

864 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question