Clear config on Sonicwall TZ170

Posted on 2012-08-13
Last Modified: 2012-08-27
Hello, is there a way to reset the config of the TZ170 sonicwall if I have it connected via ethernet to a laptop?

I dont know what was its old local IP..

Thank you!
Question by:darkbluegr
    LVL 20

    Expert Comment

    Try issuing "arp -a" from the command prompt on the PC. Does is show an ip for the Sonicwall?
    LVL 77

    Accepted Solution

    Default IP is  If DHCP is enabled ipconfig will confirm the gateway/router IP.

    If you do need to reset the procedure is outlined in detail in the following link:

    Author Closing Comment

    Thanks, this worked!

    Featured Post

    6 Surprising Benefits of Threat Intelligence

    All sorts of threat intelligence is available on the web. Intelligence you can learn from, and use to anticipate and prepare for future attacks.

    Join & Write a Comment

    #Citrix #Citrix Netscaler #HTTP Compression #Load Balance
    Join Greg Farro and Ethan Banks from Packet Pushers ( and Greg Ross from Paessler ( for a discussion about smart network …
    After creating this article (, I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
    In this tutorial you'll learn about bandwidth monitoring with flows and packet sniffing with our network monitoring solution PRTG Network Monitor ( If you're interested in additional methods for monitoring bandwidt…

    745 members asked questions and received personalized solutions in the past 7 days.

    Join the community of 500,000 technology professionals and ask your questions.

    Join & Ask a Question

    Need Help in Real-Time?

    Connect with top rated Experts

    16 Experts available now in Live!

    Get 1:1 Help Now