Cisco ASA 5505 - Monitor IP SLA

We have a IP SLA set up on our ASA 5505 running 8.0(5) to switch us automatically between ISPs if the primary fails. The config looks like this:

sla monitor 10
 type echo protocol ipIcmpEcho 8.8.8.8 interface outside
 num-packets 3
 timeout 3000
 frequency 3
sla monitor schedule 10 life forever start-time now

Open in new window


I'm trying to monitor the SLA via SNMP. From the documentation I can find, it looks like the state of the SLA should be available at the following MIB:
1.3.6.1.4.1.9.9.42.1.2.9.1.6.x

Open in new window


Where "x" is the SLA number (in my case 10). When I try to query that location, I get the following error message:
SNMPv2-SMI::enterprises.9.9.42.1.2.9.1.6.10 = No Such Object available on this agent at this OID

Open in new window


If I do a snmpwalk on the ASA, I notice that 1.3.6.1.4.1.9.9.42 does not exist, nor anything past it.

Is this functionality available in a newer version of the ASA code? If so, what version?
LVL 5
mwheeler1982Asked:
Who is Participating?
 
Ernie BeekConnect With a Mentor ExpertCommented:
Afaik the ASA doesn't support it (yet?)

Do you happen to have a smartnet of some sort for the ASA. Then you might want to give it a go at Cisco's, perhaps there is a way I'm not aware of.
0
 
mwheeler1982Author Commented:
This does not appear to be supported on my ASA.
0
Question has a verified solution.

Are you are experiencing a similar issue? Get a personalized answer when you ask a related question.

Have a better answer? Share it in a comment.

All Courses

From novice to tech pro — start learning today.