• Status: Solved
  • Priority: Medium
  • Security: Public
  • Views: 1407
  • Last Modified:

Site to Site VPN Configuration

I need configuration assistance with a B2B VPN.  Site A(my site) has a Juniper SSG5 Firewall.  Site B(client) has a Cisco 3745 Router.  I am not at all familiar with Juniper so I'm not sure how to configure this.  Here is my situation:

I have several users on my side that receive IP via DHCP server(192.168.100.x)  They will need to initiate traffic to the remote site at IP 172.23.244.168 nat'd to 166.122.100.1.  What is the best method to accomplish this?  Let's say peer ips are 2.2.2.2 and 3.3.3.3.    Can the Juniper device do a policy NAT so the DHCP users can initiate the traffic from a static IP?
0
NytroZ
Asked:
NytroZ
1 Solution
 
FideliusCommented:
Hello,

Here is good link for configuration steps on both devices:
http://blog.mozilla.org/mrz/2007/07/16/ipsec-vpn-between-cisco-ios-netscreen-solved/

And here is usable document for GUI configuration:
www.dotlike.net/ddl/papers_count.php?d=10

Hope it will help!

Regards!
0
Question has a verified solution.

Are you are experiencing a similar issue? Get a personalized answer when you ask a related question.

Have a better answer? Share it in a comment.

Join & Write a Comment

Featured Post

Worried about phishing attacks?

90% of attacks start with a phish. It’s critical that IT admins and MSSPs have the right security in place to protect their end users from these phishing attacks. Check out our latest feature brief for tips and tricks to keep your employees off a hackers line!

Tackle projects and never again get stuck behind a technical roadblock.
Join Now