c_hockland
asked on
RHEL installation from ISO error :
I have the iso on my laptop. I am connected via drac to the server. The installation starts but after the time zone i get an error
Unable to read group information from repositories
This is a problem with the generation of your install tree
I did some google and saw that i might have to activate the logical volume with:
lvchange -ay /dev/VolGrp_Raid5/LogVol_R aid5
not sure though...
any ideas ?
I am installing the OS in a RAID1 configuration
Unable to read group information from repositories
This is a problem with the generation of your install tree
I did some google and saw that i might have to activate the logical volume with:
lvchange -ay /dev/VolGrp_Raid5/LogVol_R
not sure though...
any ideas ?
I am installing the OS in a RAID1 configuration
ASKER CERTIFIED SOLUTION
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
If the new ISO fails again but verifies ok you may be able to do an network install, it's a smaller ISO image and you can get the installation media off the internet.
ASKER
I will try with the new iso.