c_hockland
asked on
RHEL Determining IP information for eth0...failed
I am running RHEl 5.8
i have assigned IP address and subnet mask correctly on eth0
i can ping my IP but cannot pint the gw
when i do ethtool eth0 i see link is on.
Any ideas ?
i have assigned IP address and subnet mask correctly on eth0
i can ping my IP but cannot pint the gw
when i do ethtool eth0 i see link is on.
Any ideas ?
Did you assign a default gateway? Can you post the output of route -n?
Did you ping using hostname or ip address, what was the error?
Try the ip.
Is dns configured? Try moving /etc/resolv.conf and try again.
Try the ip.
Is dns configured? Try moving /etc/resolv.conf and try again.
ASKER
Is the gw and the server connected to the same LAN segment?
ASKER
yes , it used to work , i just did a new installation of redhat as i am working on refreshing the servers here.
So i used the same IP as before.
So i used the same IP as before.
ASKER
IP is 10.58.20.20
GW is 10.58.20.1
GW is 10.58.20.1
ASKER
here is some more testing that i did
EE.jpg
EE.jpg
Did you configure the interface with the gateway? Please post the output of route -n
ASKER CERTIFIED SOLUTION
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
SOLUTION
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.