Cisco CME Presence between SCCP and SIP

I have numerous SCCP phones and 3 SIP phones on CUCME.

     presence enable

 presence call-list
 max-subscription 128
 watcher all
 allow subscribe

ephone  1
  device-security-mode none
  mac-address XXXX.XXXX.XXXX
  username "User" password 5555
  presence call-list
  blf-speed-dial 1 1234 label "Joe"
  blf-speed-dial 2 4321 label "Mac" device
  type 7960
  mwi-line 1
  button  1:1

voice register pool  1
 type 9971
 number 1 dn 1
 dtmf-relay rtp-nte
 username joe password 4321
 codec g711ulaw

voice register dn  1
 number 1234
 call-forward b2bua busy 1111
 call-forward b2bua noan 1111 timeout 20
 allow watch
 name Joe
 shared-line max-calls 3
 huntstop channel 3
 label 1

Open in new window

This is the info from "sho pres sub sum"

Presence Active Subscription Records Summary: 0 subscription

  D indicate as device-based blf-speed-dial monitoring

Watcher                    Presentity               SubID  Expires SibID  Status
========================== ======================== ====== ======= ====== ======

Open in new window

Can someone please give me some guidance as to what I'm missing, exactly?

SCCP phones can watch other SCCP phones just fine, but cannot watch SIP phones (speed dial shows keypad icon - basic speed dial - instead of the BLF icon)

Thanks in Advance!
Who is Participating?
delptAuthor Commented:
Really? Nobody knows anything about this?
delptAuthor Commented:
delptAuthor Commented:
There were no people knowledgeable in Cisco CME SCCP/SIP telephony on Experts Exchange.
Question has a verified solution.

Are you are experiencing a similar issue? Get a personalized answer when you ask a related question.

Have a better answer? Share it in a comment.

All Courses

From novice to tech pro — start learning today.