manojgar
asked on
Slow printing issue on Windows 2008 R2 Stan
We are facing slow printing issue on one of the Windows 2008 R2 Stan. server.
Did not find any suspected event on the server, Server is having different -2 model of print queues installed on the server.
We have found spoolss.dll version 6.1.7600.16385
Please help us ASAP..
Thanks
Did not find any suspected event on the server, Server is having different -2 model of print queues installed on the server.
We have found spoolss.dll version 6.1.7600.16385
Please help us ASAP..
Thanks
Also try from an elevated CMD to run the following command:
net interface tcp set global autotuninglevel=disabled
net interface tcp set global autotuninglevel=disabled
ASKER
TCP Chimney offload is disabled ..
ASKER CERTIFIED SOLUTION
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
Try also to disable TCP Chimney offload from an ELEVATED CMD by using the following command:
netsh int tcp set global chimney=disabled
If this didn't help then disable TCP RSS, again from an ELEVATED CMD, by using the following command:
netsh int tcp set global RSS=disabled