?
Solved

Trouble With Openvpn and Tomato On Linksys e3000

Posted on 2012-09-07
2
Medium Priority
?
591 Views
Last Modified: 2012-12-23
Hi I have been running openvpn on a linksys wrt54gl running tomato and it has been working like a dream.  Recently the old router has started to have some wireless issues so I deiced to upgrade the hardware to a linksys e3000.  I checked compatibility and tomato has a vpn bundle just for that router.  So I installed it and transferred the settings from the old one to the new one.  However my client connects to it or so it says but it never pulls an ip address and shows as disconnected in ipconfig /all.  I am not sure what to look for to trouble shoot this so an suggestions will be greatly appreciated.
0
Comment
Question by:Brainstormpc
  • 2
2 Comments
 

Author Comment

by:Brainstormpc
ID: 38378450
I have tested further and tried with another computer to log in.  It shows the server ip as %S on the first router it showed the connected ip address and the traffic back and forth.  This is still showing as though it was connected no error messages but no real connection either.  I really don't know how to troubleshoot this problem  Some kind of list I could go through for testing would be great.
0
 

Accepted Solution

by:
Brainstormpc earned 0 total points
ID: 38717683
Ok looks like no help I haven't figured it out either I gave up and went another path
0

Featured Post

New feature and membership benefit!

New feature! Upgrade and increase expert visibility of your issues with Priority Questions.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Need WiFi? Often, there are perfectly good networks that don't have WiFi capability - and there's a need to add it.  - Perhaps you have an Ethernet port into a network but no WiFi nearby. - Perhaps you have a powerline extender and no WiFi at the…
Creating an OSPF network that automatically (dynamically) reroutes network traffic over other connections to prevent network downtime.
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

862 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question